Paper
28 July 1981 Comprehensive Test Sequence For The Electron Beam Exposure System
Terrence E. Zavecz
Author Affiliations +
Abstract
The electron beam exposure systems (EBES) currently used for photomask fabrication have been designed to operate to positional accuracies of ∓ 0.031 micron over an address range of 0.20 to 1.00 micron. The tuning, calibration and characterization of these systems has required an exacting and time consuming series of tests. A standard test array, MARKET A15, has been developed which enables full system characterization with only a thirty minute master generation time'and four hours analysis. System parameters such as linewidth control, resolution, registration, absolute accuracy and pattern scale accuracy can be determined from a single plate. The tests are composed of a series of exposures designed for analysis under an optical microscope along with a second group requiring reinsertion of the plate into EBES for "self-analysis". This array can be used as a basis for tuning, monitoring and multiple systems calibration of EBES or EBES-like rastor scan systems, A discussion of tests and techniques demonstrates how several EBES type systems in Western Electric and Bell Laboratories have been brought into mutual compatibility.
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Terrence E. Zavecz "Comprehensive Test Sequence For The Electron Beam Exposure System", Proc. SPIE 0275, Semiconductor Microlithography VI, (28 July 1981); https://doi.org/10.1117/12.931874
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Visualization

Interferometers

Calibration

Electron beams

Moire patterns

Optical lithography

Semiconductors

RELATED CONTENT


Back to Top