Paper
26 December 1984 Modal Noise In Single-Mode-Fiber Communication System
F. T. Stone
Author Affiliations +
Abstract
The amount of modal noise that appears in a single-mode-fiber communication system depends on the coherence properties of the laser transmitter, the length of the noise-generating fiber present in the system, and the splice losses of the connections to that piece of fiber. This paper shows that the coherence lengths of multi-mode lasers are sufficient to generate modal noise over lengths as long as several tens of meters. Nevertheless, the attenuation of the higher-order mode, even for lasers operated several tens of nm below the effective cutoff wavelength, is sufficient to reduce the modal noise to tolerable levels. From model noise experiments at 90 Mb/s, 432 Mb/s, and 1.7 Gb/s, a fiber design equation is derived that quantifies the relation between the minimum length of fiber that can be used and the maximum amount by which the effective cutoff wavelength can exceed the operating wavelength.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. T. Stone "Modal Noise In Single-Mode-Fiber Communication System", Proc. SPIE 0500, Fiber Optics: Short-Haul and Long-Haul Measurements and Applications II, (26 December 1984); https://doi.org/10.1117/12.944571
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal attenuation

Single mode fibers

Fiber optics

Cladding

Fiber lasers

Telecommunications

Fiber optics tests

RELATED CONTENT


Back to Top