Paper
17 November 2016 Studies on the amplified spontaneous emission of a polymer fiber
Songtao Li, Li Wang, Tianrui Zhai, Xiaofeng Wu, Fei Tong, Xinping Zhang
Author Affiliations +
Abstract
In this paper, a polymer fiber was constructed by siphoning the xylene solution of a polymer into a capillary tube with 300 μm inner diameter. After the solvent evaporating, the polymer fiber was lighted by an external pump beam and the amplified spontaneous emission (ASE) of the polymer fiber is investigated. The emission spectra are recorded, and the intensity and the full width at half maximum (FWHM) as a function of pump power intensity are analyzed. The absorption coefficient of polymer F8BT is obtained from a polymer F8BT film with a thickness of 200 nm. For the high absorption of polymer, the pump beam can not penetrate the long F8BT fiber. The sketch up diagram and an optical photo show it in vividly. This fabrication method provides a cheap way for application of micro polymer fiber. Keywords: polymer fiber, amplified spontaneous emission, absorption coefficient
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Songtao Li, Li Wang, Tianrui Zhai, Xiaofeng Wu, Fei Tong, and Xinping Zhang "Studies on the amplified spontaneous emission of a polymer fiber", Proc. SPIE 10027, Nanophotonics and Micro/Nano Optics III, 1002708 (17 November 2016); https://doi.org/10.1117/12.2246011
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Absorption

Capillaries

Ocean optics

Polymer thin films

Liquids

Photomicroscopy

Back to Top