Paper
23 April 2017 Ultrasonic imaging of seismic physical models using fiber Bragg grating Fabry-Perot probe
Ruixiang Zhou, Xunli Yin, Xueguang Qiao
Author Affiliations +
Proceedings Volume 10323, 25th International Conference on Optical Fiber Sensors; 103235S (2017) https://doi.org/10.1117/12.2262283
Event: 25th International Conference on Optical Fiber Sensors, 2017, Jeju, Korea, Republic of
Abstract
A fiber-optic sensor has been proposed and demonstrated for the ultrasonic wave (UW) imaging of seismic physical models. The sensor probe comprises a fiber Bragg grating Fabry-Perot (FBG-FP) mounted inside the tip of an aluminum cone focusing the UW into the fiber. The FBG-FP probe possesses an excellent UW sensitivity because of the narrowband notches on the top of the reflection spectrum caused by the Fabry-Perot (FP) interference. Because of the symmetrical structure of the sensor, it provides a directional UW detection with a high signal-to-noise ratio. As expected, the two-dimensional (2D) images of two physical models are reconstructed.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ruixiang Zhou, Xunli Yin, and Xueguang Qiao "Ultrasonic imaging of seismic physical models using fiber Bragg grating Fabry-Perot probe", Proc. SPIE 10323, 25th International Conference on Optical Fiber Sensors, 103235S (23 April 2017); https://doi.org/10.1117/12.2262283
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber Bragg gratings

Ferroelectric materials

Aluminum

Fabry–Perot interferometers

Acoustics

Signal to noise ratio

Back to Top