Paper
26 June 2017 Optoelectronic joined-channel autocollimator for measuring three angular coordinates
Anton Nogin, Igor Konyakhin
Author Affiliations +
Abstract
The article is based on some research which is considering the three-axis angle measuring autocollimator with one channel capable of measuring three angular coordinates simultaneously. In order to measure angular displacements around the three main coordinate axes (OX, ОY, and ОZ), special control elements are used. The use of a special control element generally improves the characteristics of the device, but it creates a problem of autocollimation mark overlapping. This issue creates a zone of inoperability of the device and makes measurement and control impossible. The ways of solving this problem are not considered in this paper. The prototype of an optoelectronic joined-channel autocollimator with a tetrahedral control element is developed. The developed prototype passed functional testing, calibration was conducted with using a flat mirror. The paper also shows the results of the research device accuracy in the measurement of different angles.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anton Nogin and Igor Konyakhin "Optoelectronic joined-channel autocollimator for measuring three angular coordinates", Proc. SPIE 10329, Optical Measurement Systems for Industrial Inspection X, 103293C (26 June 2017); https://doi.org/10.1117/12.2269527
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Autocollimators

Mirrors

Prototyping

Optoelectronics

Calibration

Reflectors

Autocollimation

Back to Top