Modeling the Extremely Lightweight Zerodur Mirror (ELZM) thermal soak test

Thomas E. Brooks; Ron Eng; Tony Hull; H. Philip Stahl

doi:10.1117/12.2274084

6 September 2017 Modeling the Extremely Lightweight Zerodur Mirror (ELZM) thermal soak test

Thomas E. Brooks, Ron Eng, Tony Hull, H. Philip Stahl

Proceedings Volume 10374, Optical Modeling and Performance Predictions IX; 103740E (2017) https://doi.org/10.1117/12.2274084
Event: SPIE Optical Engineering + Applications, 2017, San Diego, California, United States

Abstract

Exoplanet science requires extreme wavefront stability (10 pm change/10 minutes), so every source of wavefront error (WFE) must be characterized in detail. This work illustrates the testing and characterization process that will be used to determine how much surface figure error (SFE) is produced by mirror substrate materials’ CTE distributions. Schott’s extremely lightweight Zerodur mirror (ELZM) was polished to a sphere, mounted, and tested at Marshall Space Flight Center (MSFC) in the X-Ray and Cryogenic Test Facility (XRCF). The test transitioned the mirror’s temperature from an isothermal state at 292K to isothermal states at 275K, 250K and 230K to isolate the effects of the mirror’s CTE distribution. The SFE was measured interferometrically at each temperature state and finite element analysis (FEA) has been completed to assess the predictability of the change in the mirror’s surface due to a change in the mirror’s temperature. The coefficient of thermal expansion (CTE) distribution in the ELZM is unknown, so the analysis has been correlated to the test data. The correlation process requires finding the sensitivity of SFE to a given CTE distribution in the mirror. A novel hand calculation is proposed to use these sensitivities to estimate thermally induced SFE. The correlation process was successful and is documented in this paper. The CTE map that produces the measured SFE is in line with the measured data of typical boules of Schott’s Zerodur glass.

Conference Presentation

Citation Download Citation

Thomas E. Brooks, Ron Eng, Tony Hull, and H. Philip Stahl "Modeling the Extremely Lightweight Zerodur Mirror (ELZM) thermal soak test", Proc. SPIE 10374, Optical Modeling and Performance Predictions IX, 103740E (6 September 2017); https://doi.org/10.1117/12.2274084

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available