Optical measuring system for the geometrical parameters of Rockwell and Vickers diamond hardness indenters

Liqiong Zhang; Yuanyuan Cui; Feng Zhang

doi:10.1117/12.2296350

15 November 2017 Optical measuring system for the geometrical parameters of Rockwell and Vickers diamond hardness indenters

Liqiong Zhang, Yuanyuan Cui, Feng Zhang

Author Affiliations +

Proceedings Volume 10605, LIDAR Imaging Detection and Target Recognition 2017; 106054D (2017) https://doi.org/10.1117/12.2296350
Event: LIDAR Imaging Detection and Target Recognition 2017, 2017, Changchun, China

Abstract

Hardness testing is widely used for characterizing the mechanical properties of materials. However, the measured hardness values in hardness measurements are strongly influenced by the geometrical parameters of diamond hardness indenters. In the most severe case, the geometrical error of the diamond indenter, Rockwell hardness measurements in particular, leads to be about 50% hardness measurement uncertainty. It has been generally recognized for many years that the geometry of diamond indenters must be calibrated or verified before use to correct the hardness value for each indenter and improve the hardness measurement uncertainty. The contact-based calibration methods and the contactless based optical measuring methods are two typical ways to calibrate the geometrical form of an indenter at present. The contact-based calibration methods characterized by large measurement range of tens of mm with nanometer resolution, has a time-consuming measurement process, the contactless based optical measuring methods have become a general trend. In this work, an optical measuring system, which employs the combination of an interferometric microscope and a profile projection technique, is presented to measure and calibrate the geometrical parameters of Rockwell and Vickers diamond hardness indenters in National Institute of Metrology of China. Initial experiments demonstrated that the angle and axis angle measurement of indenter are achieved with accuracy of 0.1°, the straightness deviation of Rockwell indenters is less than 2μm, the radius measurement uncertainty of the tip of Rockwell indenters is better than 5μm.

Citation Download Citation

Liqiong Zhang, Yuanyuan Cui, and Feng Zhang "Optical measuring system for the geometrical parameters of Rockwell and Vickers diamond hardness indenters", Proc. SPIE 10605, LIDAR Imaging Detection and Target Recognition 2017, 106054D (15 November 2017); https://doi.org/10.1117/12.2296350

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available