Paper
13 July 2018 The opto-mechanical design of the GMT-Consortium Large Earth Finder (G-CLEF)
Mark Mueller, Andrew Szentgyorgyi, Daniel Baldwin, Sagi Ben-Ami, Jamie Budynkiewicz, Moo-Young Chun, Jeffrey D. Crane, Daniel Durusky, Harland Epps, Ian Evans, Janet Evans, Anna Frebel, Tyson Hare, Andres Jordan, Kang-Min Kim, Mercedes Lopez-Morales, Kenneth McCracken, Stuart McMuldroch, Joseph Miller, Jae Sok Oh, Cem Onyuksel, Chan Park, Sang Park, Charles Paxson, David Plummer, William Podgorski, Alan Uomoto, Young-Sam Yu
Author Affiliations +
Abstract
The GMT-Consortium Large Earth Finder (G-CLEF) will be part of the first generation instrumentation suite for the Giant Magellan Telescope (GMT). G-CLEF is a general purpose echelle spectrograph operating in the optical passband with precision radial velocity (PRV) capability. The measurement precision goal of G-CLEF is 10 cm/sec; necessary for the detection of Earth analogues. This goal imposes challenging stability requirements on the optical mounts and spectrograph support structures especially when considering the instrument’s operational environment. G-CLEF’s accuracy will be influenced by changes in temperature and ambient air pressure, vibration, and micro gravity-vector variations caused by normal telescope motions. For these reasons we have chosen to enclose G-CLEF’s spectrograph in a wellinsulated, vibration-isolated vacuum chamber in a gravity invariant location on GMT’s azimuth platform. Additional design constraints posed by the GMT telescope include; a limited space envelope, a thermal leakage ceiling, and a maximum weight allowance. Other factors, such as manufacturability, serviceability, available technology, and budget are also significant design drivers. G-CLEF will complete its Critical Design phase in mid-2018. In this paper, we discuss the design of GCLEF’s optical mounts and support structures including the choice of a low-CTE carbon-fiber optical bench. We discuss the vacuum chamber and vacuum systems. We discuss the design of G-CLEF’s insulated enclosure and thermal control systems which simultaneously maintain the spectrograph at milli-Kelvin level stability and limit thermal leakage into the telescope dome. Also discussed are micro gravity-vector variations caused by normal telescope slewing, their uncorrected influence on image motion, and how they are dealt with in the design. We discuss G-CLEF’s front-end assembly and fiber-feed system as well as other interface, integration and servicing challenges presented by the telescope, enclosure, and neighboring instrumentation. This work has been supported by the GMTO Corporation, a non-profit organization operated on behalf of an international consortium of universities and institutions: Arizona State University, Astronomy Australia Ltd, the Australian National University, the Carnegie Institution for Science, Harvard University, the Korea Astronomy and Space Science Institute, the São Paulo Research Foundation, the Smithsonian Institution, the University of Texas at Austin, Texas AM University, the University of Arizona, and the University of Chicago.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark Mueller, Andrew Szentgyorgyi, Daniel Baldwin, Sagi Ben-Ami, Jamie Budynkiewicz, Moo-Young Chun, Jeffrey D. Crane, Daniel Durusky, Harland Epps, Ian Evans, Janet Evans, Anna Frebel, Tyson Hare, Andres Jordan, Kang-Min Kim, Mercedes Lopez-Morales, Kenneth McCracken, Stuart McMuldroch, Joseph Miller, Jae Sok Oh, Cem Onyuksel, Chan Park, Sang Park, Charles Paxson, David Plummer, William Podgorski, Alan Uomoto, and Young-Sam Yu "The opto-mechanical design of the GMT-Consortium Large Earth Finder (G-CLEF)", Proc. SPIE 10702, Ground-based and Airborne Instrumentation for Astronomy VII, 107029U (13 July 2018); https://doi.org/10.1117/12.2313582
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectrographs

Telescopes

Space telescopes

Cameras

Mirrors

Electronics

Optical mounts

Back to Top