A hybrid approach of two-photon polymerization scaffold printing and microinjection of optically heterogenous material for the fabrication of vascular imaging phantoms (Conference Presentation)

Callum Little; Radhika Poduval; Richard Caulfield; Sacha Noimark; Richard J. Colchester; Chris D. Loder; Manish K. Tiwari; Roby D. Rakhit; Ioannis Papakonstantinou; Adrien E. Desjardins

doi:10.1117/12.2508642

7 March 2019 A hybrid approach of two-photon polymerization scaffold printing and microinjection of optically heterogenous material for the fabrication of vascular imaging phantoms (Conference Presentation)

Callum Little, Radhika Poduval, Richard Caulfield, Sacha Noimark, Richard J. Colchester, Chris D. Loder, Manish K. Tiwari, Roby D. Rakhit, Ioannis Papakonstantinou, Adrien E. Desjardins

Author Affiliations +

Proceedings Volume 10855, Diagnostic and Therapeutic Applications of Light in Cardiology 2019; 1085507 (2019) https://doi.org/10.1117/12.2508642
Event: SPIE BiOS, 2019, San Francisco, California, United States

Abstract

With intravascular Optical Coherence Tomography (IVOCT), phantom models are invaluable for system characterization and clinical training. However, accurately simulating 3D tissue geometries and heterogeneous optical properties has been challenging with phantom fabrication methods used to date. Anatomical phantom models typically require mesoscale structures integrated with heterogenous materials to simulate optical scattering and absorption by vascular tissue. In this study, we showed that two photon polymerisation (2PP) 3D printing offers the potential to generate complex tissue phantom scaffolds with sub-micron resolution (<200 nm), and that microinjection of tissue mimicking materials into these scaffolds allows for creation of realistic mesoscale anatomical phantom models of both healthy and diseased tissues. We developed three types of IVOCT phantom models: a free-standing wire model, a vessel side-branch model and an arterial plaque model. The free-standing wires ranged in diameter from 5 to 34 microns. Integration of tissue mimicking materials was performed using micropipettes with a tip diameter of 50 to 60 microns. Healthy vascular tissue was simulated using a mixture of PDMS, silicone oil and TiO2. Coconut oil was used to simulate a pathological lipid inclusion. All models were examined using optical microscopy and scanning electron microscopy, prior to imaging with a commercial IVOCT system. To our knowledge, this is the first phantom study to use 2PP 3D printing for OCT phantoms. The combination of optically-generated 3D scaffolds and microinjection of tissue mimicking materials will enable complex imaging phantoms for a wide range of microscopic and mesoscale optical imaging techniques.

Conference Presentation

Citation Download Citation

Callum Little, Radhika Poduval, Richard Caulfield, Sacha Noimark, Richard J. Colchester, Chris D. Loder, Manish K. Tiwari, Roby D. Rakhit, Ioannis Papakonstantinou, and Adrien E. Desjardins "A hybrid approach of two-photon polymerization scaffold printing and microinjection of optically heterogenous material for the fabrication of vascular imaging phantoms (Conference Presentation)", Proc. SPIE 10855, Diagnostic and Therapeutic Applications of Light in Cardiology 2019, 1085507 (7 March 2019); https://doi.org/10.1117/12.2508642

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
PRESENTATION

WATCH
PRESENTATION SAVE TO MY LIBRARY

GET CITATION

KEYWORDS

Tissue optics

Two photon polymerization

3D modeling

Printing

Vascular imaging

Tissues

3D printing

Show All Keywords

Keywords/Phrases

Search In:

Publication Years