Paper
13 March 2019 Development of electrically pumped VECSEL in the visible spectrum
Author Affiliations +
Abstract
In this contribution, we investigated the design of an AlGaAs/AlGaInP electrically-pumped VECSEL structure emitting at a wavelength of 665 nm. With the finite element method (FEM) of an electro-thermal numerical model, we analyzed the current density distribution in the active region of different laser structures by changing the structure geometry, doping concentration of current spreading layer, and bottom contact size. A complete flip-chip processing is proposed according to the optimized designed structure. The measured results of the electroluminescence (EL) profile indicate that the diameter of the emission area with quasi-Gaussian distribution can be up to 100 μm, which is in good agreement with the numerical simulation.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhihua Huang, Michael Zimmer, Michael Jetter, and Peter Michler "Development of electrically pumped VECSEL in the visible spectrum", Proc. SPIE 10901, Vertical External Cavity Surface Emitting Lasers (VECSELs) IX, 109010U (13 March 2019); https://doi.org/10.1117/12.2509973
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Electroluminescence

Doping

Aluminum

Quantum wells

Structural design

Gallium arsenide

RELATED CONTENT

Organic quantum well EL device with a novel characteristic
Proceedings of SPIE (October 19 2001)
Comparison of the dark current from an AlGaAs GaAs and...
Proceedings of SPIE (April 08 1998)
W-band MHEMT MMIC LNA
Proceedings of SPIE (December 13 1999)
Poisson's ratio of AIAs
Proceedings of SPIE (November 29 2000)

Back to Top