Vibration measurement and mount design for cryocoolers on GMT and large telescopes

D. Adams; A. Vaccarella; W. Schofield; R. Sharp; J. Gilbert; G. Gausachs

doi:10.1117/12.2539923

3 January 2020 Vibration measurement and mount design for cryocoolers on GMT and large telescopes

D. Adams, A. Vaccarella, W. Schofield, R. Sharp, J. Gilbert, G. Gausachs

Proceedings Volume 11203, Advances in Optical Astronomical Instrumentation 2019; 1120314 (2020) https://doi.org/10.1117/12.2539923
Event: ANZCOP, 2019, Melbourne, Australia

Abstract

Cryocoolers have long been demonstrated to be a dominant source of vibration that have caused significant problems with AO systems on large telescopes. Existing large telescopes have already imposed strict vibration requirements on instruments in response to existing problems, and have often struggled to achieve them. As the field moves into the next generation telescopes with GMT, TMT and eELT, vibration requirements continue to get ever tighter. Instrument teams must respond to these more demanding requirements by careful selection of cryocoolers and thoughtful design of cryocooler mounts that are matched closely with the specific requirements of the telescope. As we will demonstrate in this paper there is not a one-size-fits-all solution for every instrument and every telescope. In this paper we demonstrate a general method of deriving the required performance for an anti-vibration mounts for cryocoolers. First we characterize a linear Stirling-type cryocooler as a source of vibration, and determine what compliant mounts would be required to make them acceptable for use on the VLT, GMT and TMT. Measurements are taken of vibration from a Cryotel GT linear Stirling cooler (with active vibration cancellation enabled). By comparing the measured vibration against the requirements of each telescope, we are able to determine the required transfer function and therefore the required spring rate for compliant mounts. The results indicate that while some simple rubber mounts may be sufficient for use with the VLT and TMT, but a compliant mount with natural frequency below 14 Hz must be used for GMT.

Citation Download Citation

D. Adams, A. Vaccarella, W. Schofield, R. Sharp, J. Gilbert, and G. Gausachs "Vibration measurement and mount design for cryocoolers on GMT and large telescopes", Proc. SPIE 11203, Advances in Optical Astronomical Instrumentation 2019, 1120314 (3 January 2020); https://doi.org/10.1117/12.2539923

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available