Paper
2 March 2020 Extra-cavity laser beam shaping using an Nd: YAG amplifier
Author Affiliations +
Abstract
This work proposes a method that can be used to control the transverse profile of the optical intensity distribution of a diode-end-pumped solid-state laser operating with a Gaussian seed beam. The transverse gain profile in an external amplifier was temporally adjusted to control other higher-order intensity distribution. The amplifier is dual pumped by two independent diode lasers. The higher-order intensity distribution profile was created within the amplifier by independently adjusting the dual diodes output powers. This technique will permit synchronised variation of both the output power of the laser and the transverse intensity distribution of a laser beam.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Teboho Bell, Gary King, and Igor Litvin "Extra-cavity laser beam shaping using an Nd: YAG amplifier", Proc. SPIE 11266, Laser Resonators, Microresonators, and Beam Control XXII, 112661D (2 March 2020); https://doi.org/10.1117/12.2543370
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam shaping

Gaussian beams

Nd:YAG lasers

Optical amplifiers

Neodymium

Semiconductor lasers

Diodes

RELATED CONTENT

Solid funnel for diode pumped high power Nd YAG slab...
Proceedings of SPIE (February 28 2014)
Diode-pumped, high-power, solid-state lasers
Proceedings of SPIE (October 01 1991)
Side pumped neodymium slab lasers Q switched by V YAG...
Proceedings of SPIE (February 28 2006)
Picosecond thin disk regenerative amplifier
Proceedings of SPIE (November 10 2003)
1 J 500 Hz MOPA solid state laser pumped by...
Proceedings of SPIE (September 01 2004)
Gain anisotropy in a diode-pumped Nd:YAG zigzag slab
Proceedings of SPIE (March 31 1997)

Back to Top