Presentation
13 December 2020 Conceptual design of the detection chain for the X-IFU on Athena
Author Affiliations +
Abstract
CNES (French Space Agency) is in charge of the development of the X-IFU instrument for Athena. The main sensor array detection chain sub-system of the X-IFU instrument is one of the major sub-subsystem of the instrument, as the main contributor to the performance. This sub-system involves major partners of the X-IFU instrument, e.g GFSC, SRON, VTT, APC, and IRAP. The purpose of this paper is to present the baseline of the definition of the X-IFU detection chain in the frame at end of phase A/beginning of phase B. The readout is based on Time Domain Multiplexing (TDM). There are strong design issues which couple the different sub-components of the detection chain (the main sensor array, the cold electronics stages, and the warm electronics). The detection chain environment (thermal, mechanical and EMI/EMC environment) also requires a transverse analysis. This paper focuses on those aspects while providing design description of the sub-components of the detection chain.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hervé Geoffray, Brian Jackson, Simon Bandler, W. Bertrand Doriese, Mikko Kirivanta, Damien Prêle, Laurent Ravera, Andrea Argan, Marco Barbera, Jan van der Kuur, Bert Joost van Leeuwen, Henk van Weers, Ruud Hoogeveen, Jan-Willem den herder, Stephen Smith, Joe Adams, James Chervenak, Malcom Durkin, Carl Reintsema, Joel Ullom, Yann Parot, Didier Barret, Claudio Macculi, Luigi Piro, Frank Brachet, and Aurélien Ledot "Conceptual design of the detection chain for the X-IFU on Athena", Proc. SPIE 11444, Space Telescopes and Instrumentation 2020: Ultraviolet to Gamma Ray, 114440X (13 December 2020); https://doi.org/10.1117/12.2563628
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
KEYWORDS
Sensors

Detector arrays

Electronics

Environmental sensing

Aerospace engineering

Fused deposition modeling

Multiplexing

Back to Top