F-molding: a new production method for largely aspherical mirrors of Cordierite

Hidehito Himeno; Yuji Ikeda; Shinji Mukai; Hidenori Yamanokuchi; Takato Honjo; Yuuki Nishi; Shinichi Yamaguchi; Kenichi Hamamura; Junpei Yamaguchi; Masatsugu Kamiura; Shinobu Nagata

doi:10.1117/12.2562006

13 December 2020 F-molding: a new production method for largely aspherical mirrors of Cordierite

Hidehito Himeno, Yuji Ikeda, Shinji Mukai, Hidenori Yamanokuchi, Takato Honjo, Yuuki Nishi, Shinichi Yamaguchi, Kenichi Hamamura, Junpei Yamaguchi, Masatsugu Kamiura, Shinobu Nagata

Author Affiliations +

Proceedings Volume 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV; 114512X (2020) https://doi.org/10.1117/12.2562006
Event: SPIE Astronomical Telescopes + Instrumentation, 2020, Online Only

Conference Poster

Abstract

Cordierite is a ceramic with low thermal expansion properties similar to Zerodure and ULE glasses in large-mirror telescopes used in Astronomy. Coefficient of thermal expansion of Cordierite is not only comparable to low thermal expansion glasses, but also has additional advantages with minimal dimensional deformation with time (~3.8nm/m/year), high Young's modulus (~145GPa), and high thermal conductivity (~4W/mK). However, Cordierite mirror is susceptible to voids generated by crushed grains leading to tetrahedral gaps from sphere packing of raw powder material during CIP (Cold Isostatic Pressing) process. These voids often appear with mirror polishing of Cordierite and may become a source of light scattering. To solve this problem, we propose Flexible Molding (Fmolding) as our new fabrication method for Cordierite. With F-molding, raw material powder is converted to liquid slurry which is then poured into a resin mold and solidified directly into near net shape of a mirror. Liquid slurry of Fmolding are thus cured in forming without pressurized sphere packing which generates void defects. In addition, the mold prepared from F-molding is an effective tool for processing multiple volumes of identical structures and is an ideal process for segmented mirror designs. To confirm the feasibility of F-molding for large mirrors used in Astronomy, we prepared a light-weighted flat mirror (270 mm in diameter) using the method with our Cordierite. In this paper, we introduce details of our F-molding mirror fabrication method, and report on measurement results of its optical performances.

Citation Download Citation

Hidehito Himeno, Yuji Ikeda, Shinji Mukai, Hidenori Yamanokuchi, Takato Honjo, Yuuki Nishi, Shinichi Yamaguchi, Kenichi Hamamura, Junpei Yamaguchi, Masatsugu Kamiura, and Shinobu Nagata "F-molding: a new production method for largely aspherical mirrors of Cordierite", Proc. SPIE 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV, 114512X (13 December 2020); https://doi.org/10.1117/12.2562006

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available