MAVIS IFU with AO for VLT: image slicer concept and design

Robert Content; Giovanni Cresci; Simon Ellis; Richard McDermid; François Rigaut

doi:10.1117/12.2562744

14 December 2020 MAVIS IFU with AO for VLT: image slicer concept and design

Robert Content, Giovanni Cresci, Simon Ellis, Richard McDermid, François Rigaut

Proceedings Volume 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV; 1145171 (2020) https://doi.org/10.1117/12.2562744
Event: SPIE Astronomical Telescopes + Instrumentation, 2020, Online Only

Conference Poster

Abstract

MAVIS is a future imaging spectrograph for the VLT in which the spectrograph is fed by an IFU. Imager and IFU are fed by Multi-Conjugate Adaptive Optics for the wavelength range 370 nm to 930 nm. The spectrograph will deliver a spectral resolution of more than 4000. The IFU field has a choice of 2 spaxel sizes. It is 9 arsec2 with 25 mas spaxels and 36 arsec2 with 50 mas. The design follows the proven concept of Advanced Image Slicer (AIS) as for Gemini NIFS and GNIRS, VLT MUSE and KMOS, JWST NIRSpec, and many others. In the present design, the field is first split in 2 and each subfield is imaged on a slicer mirror array made of long thin mirrors that slice the field into 50 images and send them in different directions to be reimaged side by side on the slit by another mirror array. Additional optics on the slit reimage the pupil at the right place in the spectrograph. Three different options are under study for the slit optics. One is a mirror array of considerably lower cost than the standard design in an AIS. At 25 mas, the spaxels are near the diffraction limit of the longest wavelength. This present challenges not present for seeing limited IFUs as focal ratio degradation due to diffraction by the slices. Another challenge comes from the short minimum wavelength. It is difficult to manufacture efficient reflection coatings for the whole wavelength range. Transmissive fore-optics were then also studied. The field splitter which sends half the field to each of the 2 arms was integrated into the fore-optics. This removes 2 air-glass surfaces from each arm.

Citation Download Citation

Robert Content, Giovanni Cresci, Simon Ellis, Richard McDermid, and François Rigaut "MAVIS IFU with AO for VLT: image slicer concept and design", Proc. SPIE 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV, 1145171 (14 December 2020); https://doi.org/10.1117/12.2562744

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available