Paper
31 August 2021 Experimental study on micro texture processed by coaxial water assisted laser processing
Author Affiliations +
Proceedings Volume 11907, Sixteenth National Conference on Laser Technology and Optoelectronics; 119071G (2021) https://doi.org/10.1117/12.2602990
Event: Sixteenth National Conference on Laser Technology and Optoelectronics, 2021, Shanghai, China
Abstract
In recent years, micro texture has been widely used in bearing and tool friction reduction. Laser machining is one of the most commonly used methods to process micro texture. Aiming at the recast layer and heat affected zone produced in laser texturing process, a water assisted laser processing technology was used to eliminate the adverse effects as much as possible. Taking 304 stainless steel as the research object, the effects of laser processing in the air and water assisted laser processing on the processing area and micro texture edge morphology were compared and analyzed. The influence of two machining methods on friction coefficient of lubrication micro texture friction pair was analyzed. The results show that the water assisted machining method reduces the heat affected zone and the cone angle of the edge. Moreover, water assisted laser processing avoids the generation of micro cracks which is very beneficial to the texture process of laser processing.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tong Liu, Chunhai Guo, Jianqiang Ma, Chenhu Yuan, Bin Wang, Xiaowen Cao, and Wenwu Zhang "Experimental study on micro texture processed by coaxial water assisted laser processing", Proc. SPIE 11907, Sixteenth National Conference on Laser Technology and Optoelectronics, 119071G (31 August 2021); https://doi.org/10.1117/12.2602990
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top