|
1.INTRODUCTIONDay by day we can read in the newspapers, how companies of any sector suffer cyberattacks with data theft, locker, or spy. The encryption techniques used these years are based on a complex algorithm that is impossible to break with sufficient key length. But, since the development of the quantum computer, in the last year, this algorithm will be broken in minutes or seconds. In this way, the Quantum Key Distribution, QKD, was born as the only solution to defend against cyberattacks in communications because the secrecy of the encryption key is guaranteed by the laws of quantum mechanics.1 The use of QKD protocols through fiber optics networks is challenging, and it is limited to a distance of about 500Km,2 because of the attenuation and birefringence of the medium. In order to avoid this, the free space optics communications with horizontal links or vertical links are the unique solution to implement QKD protocols ranging from hundreds to thousands of kilometers. Further, the increase in privatization of space activities has brought up a new generation of space companies, with launch cost a fraction of the cost of a traditional spacecraft. The so-called Cubesats have become very popular within centre researches or universities. However, the main disadvantage of the free space communications is the negative effect of the atmosphere (clouds or turbulence). In this way, in emergency cases or natural disasters, for example, a Transportable Ground Station can be moved quickly to a place with better atmospheric conditions, Whereas a fixed optical ground station cannot. Because of this, the optical ground station have been a similar deployment in the sector, searching for a low-cost solution and miniaturized. Until now, the Optical Ground Station used, have been fixed in astronomical observatories sites, but now, secret communications are required everywhere. In this paper we present several designs of a Transportable Optical Ground Station that allow to share keys between two sites, with terrestrial or satellite LEO links. 2.QKD QUANTUM KEY DISTRIBUTIONIn 1984, Bennet and Brassard proposed the first quantum cryptography protocol, known as BB84 protocol, referred to as Quantum Key Distribution QKD, in order to establish a common secret key between sender (named Alice) and receiver (named Bob) using polarized photons called qubits.3 Since BB84, others protocols have been implemented: B92, ERP, SARG04, or COW protocol. A QKD generic scheme includes two parts:
QKD protocols can divide into discrete variables (DV) and continuous variables (CV), according to how send the information, and how detect it. Table 1.Type of protocol according sending and detect information
From 1984 until today, many projects have been carried out, via fiber optics and free space channels, but currently, the maximum fiber optics distribution distance is 509 km, while satellite to ground with LEO satellite exceeds widely this amount.4 The benefit of fiber optics is that industry have alredy deployed large scale networks, and the cost of installing a new infrastructure is reduced, but the attenuation problem that affects the maximun achievable distance needs to be solved. Much greater distance could be reached in free space using satellite, i.e. LEO Low Earth Orbit.5 3.LINK BUDGETWhen we use QKD to encode the photon polarization, the total number of photons collected (total optical power) is the limiting factor of the Secret Key Generation (SKR) rate. So we need to know the power we receive in the detector, in order to know the secret key rate we can obtain. In this way, it is important to have a good link budget with all components that affect it. The key rate of a QKD system is inversely proportional to the link losses. Free space optics communications are unguided light beams transmitted through the atmosphere, and in this way, it can be scattered or absorbed under the effect of various atmospheric phenomena. When we study a LEO-to-ground link, we consider certain losses in the optical beam when it propagates through the atmosphere: The optical power collected by the receiver is given by:6 Where Pt is the transmitted power, Pr is the receiver power, Gt is the transmission gain, Gr is the reception gain, Lt is the losses of the tr ansmitter, Lr at the receiver, La the atmospheric transmittance, Lp the pointing loss, Ls the free space losses and Lsci is the scintillation loss factor. 3.1Absorption and scattering lossesThe loss in the atmospheric channel is mainly due to the absorption and scattering process, and it´s described by Beer´s law: Where T is the Transmittance, γ is the attenuation coefficient (absorption coefficient plus scattering coefficient), and z is the length of the transmission path. So, the attenuation coefficient is determined by four individual processes: molecular absorption, molecular scattering, aerosol absorption, and aerosol scattering. Due to the transmittance being the contribution of this process, we can say that the total transmittance in the atmosphere could be calculated by the product of each transmittance of different elements available in the atmosphere.? The atmospheric transmittance of the laser beam under clear sky conditions (absence of clouds, rain,…) is also dependent on the elevation angle and can be given by:6 Where Lzen is the transmittance in the vertical path, calculated based on MODTRAN, and ϕ (rad) is the zenith angle of the link. At low angles, the attenuation will become larger due to the laser beam travelling through a longer distance. MODTRAN approaches the atmosphere as a number of homogeneous layers, which can be modelled individually. The precision of MODTRAN has been confirmed through extensive validation with high spectral resolution model FASCODE. 3.2Free-space lossThe free-space loss of the optical signal is due to the optical wave propagation from the transmitter to the receiver and it is calculated as: Where λ(m) is the wavelength of the signal and R is the distance between the satellite and the OGS, which depends on the elevation angle of the satellite.7 3.3Scintillation lossThe atmospheric turbulence creates a random variation in the refractive index of the air, which is caused by pressure and temperature shift in the link way and induces eddies with changes in the index of refraction. From free space optical communications, the atmospheric turbulence has 3 main effects:
Scintillation can heavily affect an FSO communication link by causing intensity fluctuations at the receiver. These fluctuations are caused by thermal changes that lead to changes in the refractive index in small air cells, resulting in beam diffraction and beam wander. In the case of satellite downlink, the beam size is usually much larger than the size of these air cells; therefore, the effect of scintillation in the receiver is small but should be taken into consideration. The intensity of scintillation could be weak, moderate, or strong, depending of the value of the refractive index structure parameter . In order to determinate the value of , exist many statistics and numerical models, in which each one have different input values, or standard model with input values like altitude, pressure, wind speed, …, i.e Hufnagel-Valley 5/7, Cleari, and So. The Hufnagel-Valley 5/7 model has been used to determine the statistics, with a 5cm Fried parameter, the has been calculated as it follows: Where A0( is the refractive index structure parameter at ground level, Vrms (fracms) is the average wind speed along the path, HOGS(m) is the OGS altitude height and h(m) is the height above the ground station altitude. For plane wave and Kolmogorov models, the scintillation index for weak, mean, and strong turbulences can be given by the following expression: Where is the Rytov index, which when taking into account the OGS´s height can be calculated as: Where k(rad/m) is the wavenumber, ζ(rad) is the zenith angle, and Hturb is the turbulence altitude, which is considered negligible for altitudes higher than 20Km. To continue, we also must consider the aperture–averaging effect to take the receiver´s aperture diameter into account.8 This factor is expressed as: Where is the scintillation index for the receiving telescope, so the aperture-averaging factor is calculated according to the following expression: Where ϕI is the intensity structure size parameter, and it is defined by: Where Hd is 12,000 m and θ(grade) is the elevation angle of the link. Finally, for modelling the signal fluctuation due to the scintillation effect, we used the log-normal distribution that suits weak-and moderate turbulence regimes, so with the probability of availability of the link, we can calculate the scintillation losses in dB:9 4.METHODS TO IMPROVE THE LINK. ADAPTIVE OPTICSAdaptive Optics are commonly used in ground-based telescope to compensate for the light distortion caused by the atmosphere and to minimize the wavefront error, this mitigates the effect of the atmospheric turbulence. Also AO improve the coupling of the optical beam into a single mode fiber.10 The Adaptive optics (AO) module is designed to be mounted in the Nasmyth focus of a Ritchey-Chrétien 700mm aperture telescope with a f/12 focal ratio. This telescope has a central obstruction of less than 30 All the parts of the AO system are fitted inside a box, except the controllers for the electronic devices. The box is limited in size and weight and will be closed and isolated to protect the optical elements inside. The main elements of the system are a Fast steering mirror (FSM) to correct the Tip/tilt, a deformable mirror (DM) to correct higher order aberrations installed at the telescope exit pupil, a coupling relay to couple the light to a SMF fiber, a magnification relay for feeding signal to the wavefront sensor, and the plenoptic camera, consisting of an array of microlens mounted at the back focal length of an objective lens. Additionally, the system has a calibration source that can be inserted into the path with a flip mirror and a multi-mode fiber laser to be used as a beacon, launched with the telescope, and inserted into the path with a dichroic mirror. A schematic view of the AO system is shown in the next figure. The data signal to be coupled into a single mode fiber has a wavelength of 1550nm while the correction channel for the plenoptic camera wavefront sensor has a wavelength of 850nm. The combination of these two wavelengths sharing same optical elements is problematic. Achromatic doublets have been used to reduce the on-axis spherical aberration, some restrictions have been imposed: the signal to be coupled has priority over the optical elements, so all the coatings on the shared path have been selected accordingly to the 1550nm wavelength. As stated previously, the system is intended to be used in several scenarios, mostly horizontal links during daytime, that has the strongest turbulence. Simulations performed by our group show how a plenoptic wavefront sensor delivers better correction for strong turbulence than a typical Shack-Hartmann (SH).11 Typical Fried parameters (r0) for the operation of the optical link are expected to be in the range between 2cm (strong turbulence) up to 15cm (weak turbulence). 5.TOGS SYSTEM ARCHITECTUREThe TOGS designed and developed by IACTEC, include functionality for terrestrial and bidirectional LEO to ground links. Terrestrial links include communications between buildings, mountains, islands, or any other kind of horizontal link between two ground station, and LEO links include both ground-to-satellite and satellite-to-ground, in order to share quantum keys between both. The scheme we proposed for our TOGS is BB84 discrete variable protocol as baseline, with four different linear polarization (H/V/+/-).12 We split the system design in 3 parts: Mechanical design, that include dome, holders, trailers and all the transportable parts, optical subsystem, that include Telescope, “AliceBox“ and “BobBox”, and electronics subsystems that include the data post processing. “AliceBox” include the sender of the quantum key, and “BobBox” include the receiver of the quantum key, this box shared parts like telescope. AliceBox and BobBox are a modular box each one, with the optical components inside that mount in the Nasmyth focus of the telescope. Figure 7 shows an schematic of the TOGS architecture with signal and components 6.TOGS DRAFTSWe studied previous designs for optical communications ground stations13141516 We had many iterations before the final design. From 2021 to 2022, we iterate design in order to get the best design suited to do QKD with transportability capability. Figure 8 shows how the IACTEC ground station design envolved in time since the initial concept. Finally, we decide for a model with two mobile parts and one fixed part. The final dimensions are 2.400 x 3.714 x 4.280 mm (width, height, depth) with hydraulic legs in order to get more stability, so the size is 38 m3 and weighs 1.737 Kg. 7.MECHANICAL DESIGNOne of the most important parts of the design is the transportability capability. The mechanical design needs to fullfil the following requirements:
The main components of the TOGS are described bellow: 7.1Trailer with hydraulic legsLight trailer with four hydraulic legs, and two axes, to avoid the vibrations in the mobility. Figure 9 show this part. 7.2TelescopeThe goal was to build a transportable optical ground station capable of supporting missions from/to LEO and horizontal links. Therefore the telescope needs to have sufficient aperture to collect enough photons together with the capability of tracking LEO satellites precisely.17 We select a 0.7 meter aperture, with f/12, Ritchey-Chretien optical design. The telescope is optimized in central obstruction with less than 30% for improved image contrast and has a dual Nasmyth focus in order to mount the Adaptive Optics and transmitter key systems. The figure 10 show the telescope embedded in the trailer. 7.3Alicebox QKD transmitterThe implementation of the BB84 protocol has been done by using pulses with four polarizations equally distributed in a great circle of the poincare sphere. Four lasers are used in the transmitter to encode the bit value and measurement basis to obtain the states H¿,V¿,+45¿, and -45¿. The beams are combined in a non-polarizing beam splitter and dimmed in a variable optical attenuator. This quantum signal is combined with a beacon signal and sent to the telescope, which collimates the beam over free space towards Bob. 7.4Bobbox QKD receiver with Adaptive OpticsThe receiver has a random beam splitter, which sets the measurement basis and polarizing beam splitters measure the value of the bit. A click on one of the photon-counting detectors set the bit value and base angle of measurement. The Bobbox and Alicebox mount in each Nasmyth focus of the telescope 8.CONCLUSSIONSIn this paper, we have described our different designs and approaches for a Transportable Optical Ground Station TOGS, used for terrestrial and LEO satellite links. We expect to do this QKD links demonstration in Q3 2023, with the main goals being:
Applications of portable ground stations cover sectors like finance, defense or healthcare, in order to maintain its privacy in the near future when the classic cryptography will beocme threadtened REFERENCESAlvaro, A., Pascual, L., Abad, A., Pinto, P., Alvarez-Herrero, A., Belenguer, T., Miravet, C., Campo, P., Rodriguez, L. F., Reyes, M., Socas, J., and Bermejo, J.,
“Caramuel: The future of space quantum key distribution in geo,”
in 2022 IEEE International Conference on Space Optical Systems and Applications (ICSOS),
57
–65
(2022). Google Scholar
Chen, J.-P., Zhang, C., Liu, Y., Jiang, C., Zhang, W., Hu, X.-L., Guan, J.-Y., Yu, Z.-W., Xu, H., Lin, J., Li, M.-J., Chen, H., Li, H., You, L., Wang, Z., Wang, X.-B., Zhang, Q., and Pan, J.-W.,
“Sending-or-not-sending with independent lasers: Secure twin-field quantum key distribution over 509 km,”
Physical Review Letters, 124 070501
(2020). https://doi.org/10.1103/PhysRevLett.124.070501 Google Scholar
Bennett, C. H., Brassard, G., and Mermin, N. D., Quantum cryptography without bell’s theorem, 68
(1992). Google Scholar
Liao, S.-K., Cai, W.-Q., Liu, W.-Y., Zhang, L., Li, Y., Ren, J.-G., Yin, J., Shen, Q., Cao, Y., Li, Z.-P., Li, F.-Z., Chen, X.-W., Sun, L.-H., Jia, J.-J., Wu, J.-C., Jiang, X.-J., Wang, J.-F., Huang, Y.-M., Wang, Q., Zhou, Y.-L., Deng, L., Xi, T., Ma, L., Hu, T., Zhang, Q., Chen, Y.-A., Liu, N.-L., Wang, X.-B., Zhu, Z.-C., Lu, C.-Y., Shu, R., Peng, C.-Z., Wang, J.-Y., and Pan, J.-W.,
“Satellite-to-ground quantum key distribution,”
Nature, 549 43
–47
(2017). https://doi.org/10.1038/nature23655 Google Scholar
Wang, J., Abulizi, M., Yong, H.-L., Yin, J., Li, X.-J., Jiang, Y., Wang, W.-Y., Xue, H.-J., Chen, Y.-H., Jin, B., Yin, Y.-Y., Tu, Z.-Y., Zhu, X.-J., Zhao, S.-Q., Li, F.-Z., Shengkai, L., Cai, W.-Q., Liu, W.-Y., Cao, Y., and Pan, J.-W.,
“Portable ground stations for space-to-ground quantum key distribution,”
(2022). Google Scholar
Ntanos, A., Lyras, N. K., Zavitsanos, D., Giannoulis, G., Panagopoulos, A. D., and Avramopoulos, H.,
“Leo satellites constellation-to-ground qkd links: Greek quantum communication infrastructure paradigm,”
Photonics, 8 544
(2021). https://doi.org/10.3390/photonics8120544 Google Scholar
Vasylyev, D., Vogel, W., and Moll, F.,
“Satellite-mediated quantum atmospheric links,”
Physical Review A, 99 053830
(2019). https://doi.org/10.1103/PhysRevA.99.053830 Google Scholar
Yura, H. T. and McKinley, W. G.,
“Aperture averaging of scintillation for space-to-ground optical communication applications,”
Appl. Opt., 22 1608
–1609
(1983). https://doi.org/10.1364/AO.22.001608 Google Scholar
Giggenbach, D.,
“Fading-loss assessment in atmospheric free-space optical communication links with on-off keying,”
Optical Engineering, 47 046001
(2008). https://doi.org/10.1117/1.2903095 Google Scholar
Klop, W., Saathof, R., Doelman, N., Gruber, M., Moens, T., Tamayo, C. I. O., and Duque, C.,
“Qkd optical ground terminal developments,”
in International Conference on Space Optics — ICSO 2020,
(2021). Google Scholar
Rey, N. M., Ramos, L. F. R., Ángel Alonso-Sánchez, Garcia, I. M., Torras, J., and Socas, J.,
“Plenoptic wavefront sensor for free-space optical communications,”
Free-Space Laser Communications XXXIV, 37 SPIE(2022). Google Scholar
Anghel, C.,
“Research, development and simulation of quantum cryptographic protocols,”
Electronics and Electrical Engineering, 19
(2013). Google Scholar
Fuchs, C., Brechtelsbauer, M., Horwath, J., Shrestha, A., Moll, F., Giggenbach, D., and Schmidt, C.,
“Dlr’s transportable optical ground station,”
Advanced Solid-State Lasers Congress, LTu1B.3 Optica Publishing Group(2013). https://doi.org/10.1364/LSC.2013.LTu1B.3 Google Scholar
Moll, F., Shrestha, A., and Fuchs, C.,
“Ground stations for aeronautical and space laser communications at german aerospace center,”
96470I
(2015). Google Scholar
Lafon, R. E., Caroglanian, A., Safavi, H., Desch, N., Wu, V. C., Buenfil, M., Thompson, P. L., Merritt, S., Hall, S., howard Garon, a. paulson, D., Speer, J. V., Wilson, M., Miller, R., Haas, T. R., Trout, B., richard mason, jerome hengemihle, and jeffrey a. guzek,
“A flexible low-cost optical communications ground terminal at nasa goddard space flight center,”
Free-Space Laser Communications XXXIII, 3 SPIE(2021). https://doi.org/10.1117/12.2582869 Google Scholar
Shrestha, A. and Brechtelsbauer, M.,
“Transportable optical ground station for high-speed free-space laser communication,”
851706
(2012). Google Scholar
Saito, Y., Takenaka, H., Shiratama, K., Munemasa, Y., Carrasco-Casado, A., Trinh, P. V., Suzuki, K., Fuse, T., Takahashi, Y., Kubo-oka, T., and Toyoshima, M.,
“Research and development of a transportable optical ground station in nict: The results of the first performance test,”
Frontiers in Physics, 9
(2021). https://doi.org/10.3389/fphy.2021.636696 Google Scholar
|