Process optimization for waveguide fabrication by liftoff processing in layers deposited by pulsed laser

A. Bernard; A. Péreira; R. Orobtchouk; E. Cleyet-Merle; C. Grillet; N. Chauvin; S. Guy; Y. Guyot; A. Gassenq

doi:10.1117/12.3014379

18 June 2024 Process optimization for waveguide fabrication by liftoff processing in layers deposited by pulsed laser

A. Bernard, A. Péreira, R. Orobtchouk, E. Cleyet-Merle, C. Grillet, N. Chauvin, S. Guy, Y. Guyot, A. Gassenq

Proceedings Volume 13012, Integrated Photonics Platforms III; 130120K (2024) https://doi.org/10.1117/12.3014379
Event: SPIE Photonics Europe, 2024, Strasbourg, France

Abstract

The realization of integrated active optical systems is crucial for the use of components such as amplifiers, lasers or photodetectors on a chip. Alumina (Al₂O₃) doped with erbium is a promising material for the realization of various active functions. Indeed, the low propagation losses of Al₂O₃, the rare earth compatibility and its wide transmission band makes Al₂O₃ suitable for a wide range of applications. Nevertheless, current methods for producing such waveguides are often costly and difficult, requiring complex and potentially loss-making processing steps like etching. In this context, Pulsed Laser Deposited (PLD) combined with lift-off is a relevant method for avoiding etchings. The process is composed of three main steps: photolithography, PLD and lift-off. In this work, we present how the different steps have to be optimized to make suitable waveguides for light propagation. Notably, photolithography needs a precise cross-section profile to obtain smooth sidewall, to ease lift-off and get high resolution patterning. For PLD, SEM images showed the importance of plume directivity and orientation in the PLD chamber to achieve a good control of the waveguide shapes. Finally, we also have shown that the Erbium photoluminescence is dependent on the annealing temperature. These results highlight the essential parameters which need to be precisely controlled to achieve accurate microstructures by liftoff processing performed in PLD layers, paving the way for the demonstration of low-loss waveguides and fully integrated erbium laser without etching.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

A. Bernard, A. Péreira, R. Orobtchouk, E. Cleyet-Merle, C. Grillet, N. Chauvin, S. Guy, Y. Guyot, and A. Gassenq "Process optimization for waveguide fabrication by liftoff processing in layers deposited by pulsed laser", Proc. SPIE 13012, Integrated Photonics Platforms III, 130120K (18 June 2024); https://doi.org/10.1117/12.3014379

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available