Poster + Paper
26 August 2024 Influence of optical fiber parameters on the measurement accuracy of fiber spectroscopy
Author Affiliations +
Conference Poster
Abstract
Fiber spectroscopy technology is important in many areas of astronomical surveys. The fiber is used to transfer light from the telescope to the spectrograph. On the detector of the spectrograph, the image of fiber ends after dispersing can be obtained. In multi-mode fiber, multiple modes propagating in the fiber form a granular speckle pattern on the fiber end. In high-resolution spectral measurement, the speckle disturbs the energy distribution of the spot and reduces spectral resolution. The influence of fibers with different parameters on the centroid shift, signal-noise ratio, and radial power spectrum under artificial and mechanical disturbance is explored in this paper. The experimental results show that when the number of modes propagating in the fiber is higher, the precision of the centroid offset of the speckle is higher. Under the same disturbance condition, the speckle suppression effect is better with more mode numbers. This will be a reference for the parameter selection of optical fiber in the new instrument.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Anzhi Wang, Jiabin Wang, Lingyu Jin, Zhaoxu Gan, Gang Yue, Yunxiang Yan, Shengjia Wang, Qi Yan, Tao Geng, Pengfei Wang, Shuang Chen, and Weimin Sun "Influence of optical fiber parameters on the measurement accuracy of fiber spectroscopy", Proc. SPIE 13100, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI, 131006B (26 August 2024); https://doi.org/10.1117/12.3019934
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Speckle

Speckle pattern

Spectrographs

Optical fibers

Multimode fibers

Spectroscopy

Sensors

Back to Top