Paper
1 January 1991 Surface microtopography of thin silver films
Manuel Filipe M. Costa, Jose B. Almeida
Author Affiliations +
Abstract
The authors present ne applications for the recently developed nori-contact optical inicrotopographer emphasizing the results of topographic inspections of thin silver films edges. These films were produced by sputtering of silver through different masks, using a planar magnetron source. The results show the influence ot the thickness and position of the masks on the topography of the film near its edge. Topographic information is obtained from the horizontal shift incurred by the bright spot on an horizontal surface, which is displaced vertically, when this is illuminated by an oblique collimated laser beam. The laser beam is focused onto the surface into a diffraction limited spot and is made to sweep the surface to be examined.. The horizontal position of the bright spot is continuously imaged onto a light detector array and the information about individual detectors that are activated is used to compute the corresponding horizontal shift on the reference plane. Simple trignometric calculations are used to relate the horizontal shift to the distance between the surface and a reference plane at each sampling point and thus a map of the surface topography can be built.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Manuel Filipe M. Costa and Jose B. Almeida "Surface microtopography of thin silver films", Proc. SPIE 1332, Optical Testing and Metrology III: Recent Advances in Industrial Optical Inspection, (1 January 1991); https://doi.org/10.1117/12.51104
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silver

Thin films

Inspection

Optical inspection

Optical testing

Sputter deposition

Calibration

RELATED CONTENT

Optical residual stress measurement in TFT-LCD panels
Proceedings of SPIE (June 26 2017)
Surface inspection by optical triangulation
Proceedings of SPIE (November 15 1994)
Noncontact optical microtopography
Proceedings of SPIE (March 01 1991)
Automatic inspection technique for optical surface flaws
Proceedings of SPIE (January 01 1991)

Back to Top