Paper
1 July 1991 Low-noise high-yield octave-band feedback amplifiers to 20 GHz
Katcha Minot, Mike Cochrane, Brad Nelson, William L. Jones, Dwight C. Streit, Po-Hsin P. Liu
Author Affiliations +
Abstract
Details of the design, fabrication, and measured data for three InGaAs HEMT broadband feedback amplifiers are presented. Each amplifier was designed for octave bandwidth operation, but exhibits good performance over slightly larger bandwidths: 2-7 GHz, 5-11 GHz, and 9-19 GHz. The circuits feature compact size, low noise, and high yield. Each circuit measures approximately 2.5 mm x 1.5 mm. Maximum noise figure measured 2.1 dB with 11.8 dB minimum gain for the low-band amplifier, 1.9 dB with 9.9 dB gain for the mid-band amplifier, and approximately 2.5 dB with 8.3 dB gain for the high-band amplifier. RF yields of greater than 70 percent have been achieved.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Katcha Minot, Mike Cochrane, Brad Nelson, William L. Jones, Dwight C. Streit, and Po-Hsin P. Liu "Low-noise high-yield octave-band feedback amplifiers to 20 GHz", Proc. SPIE 1475, Monolithic Microwave Integrated Circuits for Sensors, Radar, and Communications Systems, (1 July 1991); https://doi.org/10.1117/12.44509
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Field effect transistors

Indium gallium arsenide

Interference (communication)

Microwave radiation

Systems modeling

Electronics

Back to Top