Paper
1 September 1991 Lessons learned in recent beryllium-mirror fabrication
James A. Wells, Calvin M. Lombard, George B. Sloan, Wally W. Moore Jr., Claude E. Martin
Author Affiliations +
Abstract
The lessons learned in recent fabrication of beryllium mirrors could have a significant impact on how beryllium optics of the future are produced. This paper provides an overview of the latest techniques for beryllium optics fabrication and a comparison of the results achieved. Specific technical ureas discussed include: new beryllium powders, results of consolidation, beryllium material property improvements, modified machining procedures, thermal stabilization, single point turning, burnishing techniques, replica faceplates, support structure bonding, mirror superpolishing, and new optical testing techniques.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James A. Wells, Calvin M. Lombard, George B. Sloan, Wally W. Moore Jr., and Claude E. Martin "Lessons learned in recent beryllium-mirror fabrication", Proc. SPIE 1485, Reflective and Refractive Optical Materials for Earth and Space Applications, (1 September 1991); https://doi.org/10.1117/12.46521
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beryllium

Mirrors

Polishing

Surface finishing

Coating

Optical fabrication

Skin

RELATED CONTENT

Thick, fine-grained beryllium optical coatings
Proceedings of SPIE (September 01 1991)
Beryllium Optical Mirrors By Vapor Deposition
Proceedings of SPIE (March 31 1982)
Visible scatter measurements of various materials
Proceedings of SPIE (December 01 1990)
Beryllium mirror polishing optimization for minimum cost
Proceedings of SPIE (February 12 1993)
Beryllium galvanometer mirrors
Proceedings of SPIE (September 01 1991)

Back to Top