Paper
1 February 1992 Fabrication, performance, and reliability of strained InGaAs QW lasers
Naresh Chand, Niloy K. Dutta, Sung-Nee G. Chu, William S. Hobson, John Lopata, R. Wetzel
Author Affiliations +
Abstract
Very low threshold current density (<50A cm-2, close to the theoretical limit), high quantum efficiency, high power output, low temperature sensitivity, and higher pumping efficiency of 0.98 µm wavelength InGaAs strained quantum well lasers, and very low amplifier noise close to the 3 dB quantum limit have made the 0.98 µm wavelength as the best choice for pumping Er3+-doped fiber amplifiers. Like any other semiconductor laser, these lasers also degrade, but no failure mode specific to these lasers has been observed despite a compressive strain of 1-3 x 10+10 dynes/cm2 in the active QW region. On the contrary, these lasers have immunity to sudden failure and for reasons discussed in the text they show signs of longer lifetimes than their AlGaAs/GaAs counterparts. We expect the 0.98 µm laser reliability to improve in the near future to a level comparable to any other types of semiconductor laser. Narrow far field, high power output in the fundamental transverse mode centered at 0.98 ± 0.005 µm, planarity of the structure for ease of mounting and better heat sinking, and long lifetimes are the major laser structure design considerations.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Naresh Chand, Niloy K. Dutta, Sung-Nee G. Chu, William S. Hobson, John Lopata, and R. Wetzel "Fabrication, performance, and reliability of strained InGaAs QW lasers", Proc. SPIE 1580, Fiber Optic Components and Reliability, (1 February 1992); https://doi.org/10.1117/12.135364
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Quantum wells

Indium gallium arsenide

Gallium arsenide

GRIN lenses

Reliability

Cladding

Fiber lasers

Back to Top