Paper
1 June 1992 Wavelength tuning for optimization of deep-UV excimer laser performance
Susan K. Jones, Elliott Sean Capsuto, Bruce W. Dudley, Charles R. Peters, Gary C. Escher
Author Affiliations +
Abstract
Experiments were performed to quantify the central laser wavelength setting which provided optimum imaging performance for two generations of deep UV steppers: GCA ALS Laserstep and GCA XLS Laserstep. Significant performance enhancements resulted by adjusting the central wavelength setting of the ALS system by -0.23 nm from the original baseline wavelength (point of minimum distortion). The baseline wavelength of the more advanced lens of the XLS system was closer to optimum, with acceptable imaging performance parameters over a >0.04 nm band. Lens characterization methodologies are described.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Susan K. Jones, Elliott Sean Capsuto, Bruce W. Dudley, Charles R. Peters, and Gary C. Escher "Wavelength tuning for optimization of deep-UV excimer laser performance", Proc. SPIE 1674, Optical/Laser Microlithography V, (1 June 1992); https://doi.org/10.1117/12.130345
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromatic aberrations

Distortion

Deep ultraviolet

Laser vision correction

Optical lithography

Scanning electron microscopy

Photomasks

RELATED CONTENT

0.7 NA DUV step and scan system for 150 nm...
Proceedings of SPIE (July 26 1999)
Pinhole defect detection and printability prediction
Proceedings of SPIE (December 27 1996)
Using multiple focal planes to enhance depth of focus
Proceedings of SPIE (June 01 1992)
Performance Of A KrF Excimer Laser Stepper
Proceedings of SPIE (January 01 1988)

Back to Top