Paper
11 July 1979 Design Of A Thermal Blooming Cell For Use In Evaluating Adaptive Optics
Bruce Pierce, James Harvey, Andrew Piekutowski, William MacInnis
Author Affiliations +
Proceedings Volume 0179, Adaptive Optical Components II; (1979) https://doi.org/10.1117/12.957297
Event: Technical Symposium East, 1979, Washington, D.C., United States
Abstract
An instrumentation system has been designed for the evaluation of thermal blooming compensation. The purpose is to investigate the maximization of 10.6 μm CO2 laser radiation in the target plane through maximization of the return 3-5 μm radiation from the laser induced "hot spot" by using a pinhole sensor and a slow dither algorithm. The adaptive optical component to be used in the evaluation is a three-actuator modal deformable mirror supplied to the USAF by Perkin-Elmer Corporation. This paper deals primarily with the design of a thermal blooming cell that will be used for modeling atmospheric path lengths of several kilometers within a laboratory setup where the total path length is limited to a few meters. The theory required to perform the scaling is currently available in the literature. We present it in a format designed to aid the optical engineer, whose primary concern is the evaluation of an adaptive optical system for thermal blooming compensation. The interplay of the many parameters that may be varied is illustrated in graphical form to facilitate choices. As an example, we included our design for a one-meter cell to be incorporated in the slow dither experiment.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bruce Pierce, James Harvey, Andrew Piekutowski, and William MacInnis "Design Of A Thermal Blooming Cell For Use In Evaluating Adaptive Optics", Proc. SPIE 0179, Adaptive Optical Components II, (11 July 1979); https://doi.org/10.1117/12.957297
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermal blooming

Absorption

Optical components

Adaptive optics

Atmospheric modeling

Sodium

Convection

RELATED CONTENT

Survey of adaptive optic techniques
Proceedings of SPIE (August 25 2005)
Ground-To-Space Optical Power Transfer
Proceedings of SPIE (August 08 1978)
Performance projections for laser beam power to space
Proceedings of SPIE (May 01 1992)
Wide-field-of-view adaptive optics
Proceedings of SPIE (January 13 1992)
Analytical Modeling Of DF Laser Propagation
Proceedings of SPIE (August 23 1983)

Back to Top