Paper
4 August 1993 Film thickness measurement of amorphous silicon
Wayne D. Clark, Mark E. Keefer, Dawn-Marie Cook
Author Affiliations +
Abstract
Amorphous silicon has been used extensively in electro-optical applications. Its use as a gate electrode material for advanced CMOS devices is currently being developed, as it offers certain desirable characteristics compared to the commonly used polycrystalline silicon. We have studied a series of amorphous silicon films deposited at varying temperatures. The deposition temperature ranged from 540 degree(s)C to 570 degree(s)C. The nominal thickness was approximately 1575 angstroms to 3170 angstroms. Due to the differences in deposition temperature, one would expect the optical properties to vary slightly. Using software that allows analysis of the spectral information, the dispersion was examined for each sample. With this knowledge, the film thicknesses could be reliably measured.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wayne D. Clark, Mark E. Keefer, and Dawn-Marie Cook "Film thickness measurement of amorphous silicon", Proc. SPIE 1926, Integrated Circuit Metrology, Inspection, and Process Control VII, (4 August 1993); https://doi.org/10.1117/12.148976
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amorphous silicon

Silicon films

Semiconducting wafers

Refractive index

Oxides

Silicon

Crystals

Back to Top