Paper
7 February 1994 Vibration analysis in simply supported cable using weighted optical fiber sensors
Kent A. Murphy, Tuan A. Tran, Marten J. de Vries, Richard O. Claus, Sami F. Masri
Author Affiliations +
Proceedings Volume 2072, Fiber Optic Physical Sensors in Manufacturing and Transportation; (1994) https://doi.org/10.1117/12.166860
Event: Optical Tools for Manufacturing and Advanced Automation, 1993, Boston, MA, United States
Abstract
This paper discusses a first step in the use of weighted optical fiber sensors to selectively determine the mode shape amplitudes of different vibration modes in a simply supported cable. A weighted fiber sensor has a sensitivity function that varies along the length of the fiber. To date, such weighted sensitivity fibers have been fabricated by either writing spatially chirped refractive index gratings in two-mode elliptical-core fiber or by geometrically tapering single mode or two-mode elliptical core fiber. The output signal from the fiber sensor system is proportional to the weighted integral of strain along the length of the fiber, and subsequent analysis indicates that this yields a measure of only one selected mode.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kent A. Murphy, Tuan A. Tran, Marten J. de Vries, Richard O. Claus, and Sami F. Masri "Vibration analysis in simply supported cable using weighted optical fiber sensors", Proc. SPIE 2072, Fiber Optic Physical Sensors in Manufacturing and Transportation, (7 February 1994); https://doi.org/10.1117/12.166860
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber optics sensors

Sensors

Modulation

Vibrometry

Signal processing

Fourier transforms

Photodetectors

Back to Top