Paper
1 May 1994 Series resonance inverter with triggered vacuum gaps
Geert C. Damstra, X. Zhang
Author Affiliations +
Proceedings Volume 2259, XVI International Symposium on Discharges and Electrical Insulation in Vacuum; (1994) https://doi.org/10.1117/12.174657
Event: XVI International Symposium on Discharges and Electrical Insulation in Vacuum, 1994, Moscow-St. Petersburg, Russian Federation
Abstract
Series resonance inverters based on semi-conductor switching elements are well-known and have a wide range of application, mainly for lower voltages. For high voltage application many switching elements have to be put in series to obtain sufficient blocking voltage. Voltage grinding and multiple gate control elements are needed. There is much experience with the triggered vacuum gaps as high voltage/high current single shot elements, for example in reignition circuits for synthetic circuit breaker tests. These elements have a blocking voltage of 50 - 100 kV and are triggerable by a light fiber control device. A prototype inverter has been developed that generates 0.1 Hz, 30 kV AC voltages with a flat top for tests on cables and capacitors of many micro farads fed from a low voltage supply of about 600 V. Only two TVG elements are needed to switch the resonant circuit alternatively on the positive or negative supply. The resonant circuit itself consists of the capacitance of the testobject and a high quality inductor that determines the frequency and the peak current of the voltage reversing process.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Geert C. Damstra and X. Zhang "Series resonance inverter with triggered vacuum gaps", Proc. SPIE 2259, XVI International Symposium on Discharges and Electrical Insulation in Vacuum, (1 May 1994); https://doi.org/10.1117/12.174657
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Capacitors

Switching

Capacitance

Control systems

Prototyping

Circuit switching

Switches

Back to Top