Methods for measuring the power linearity of microwave detectors for radiometric applications

Victor S. Reinhardt; Y. C. Shih; P. A. Toth; S. C. Reynolds; Arthur L. Berman

doi:10.1117/12.197339

21 December 1994 Methods for measuring the power linearity of microwave detectors for radiometric applications

Victor S. Reinhardt, Y. C. Shih, P. A. Toth, S. C. Reynolds, Arthur L. Berman

Proceedings Volume 2313, Microwave Instrumentation and Satellite Photogrammetry for Remote Sensing of the Earth; (1994) https://doi.org/10.1117/12.197339
Event: Satellite Remote Sensing, 1994, Rome, Italy

Abstract

A microwave radiometer relies on the power linearity of its microwave receivers to accurately measure the temperature of remote microwave noise sources. This paper considers linearity issues in the design and characterization of such receivers. Analysis is presented relating the radiometer temperature interpolation error to a second order power nonlinearity coefficient for the receiver. Formulas are also developed specifying the temperature error in terms of individual receiver component parameters. It is shown that the key parameter for the RF detector in the receiver is A₄, a fourth order RF distortion coefficient, and the key parameter for the RF amplifiers in the receiver is IP₃, the third order intercept. This paper also discusses experimental methods for measuring the power linearity of RF detectors to the levels required for radiometric applications. Three methods are discussed: the two-tone method, the amplitude modulation method, and the constant ratio method. The theory of determining the coefficients that characterize the nonlinearity of the detector from experimental data is presented. Experimental results are presented showing that the two-tone method and the constant ratio method agree to within experimental error. The sensitivity for measuring nonlinearities and the difficulties encountered in implementing each of these methods are also discussed.

Citation Download Citation

Victor S. Reinhardt, Y. C. Shih, P. A. Toth, S. C. Reynolds, and Arthur L. Berman "Methods for measuring the power linearity of microwave detectors for radiometric applications", Proc. SPIE 2313, Microwave Instrumentation and Satellite Photogrammetry for Remote Sensing of the Earth, (21 December 1994); https://doi.org/10.1117/12.197339

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
9 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Sensors

Receivers

Amplifiers

Video

Microwave radiation

Radiometry

Amplitude modulation

Show All Keywords

Keywords/Phrases

Search In:

Publication Years