Pattern-dependent correction of mask topography effects for alternating phase-shifting masks

Richard A. Ferguson; Alfred K. K. Wong; Timothy A. Brunner; Lars W. Liebmann

doi:10.1117/12.209267

26 May 1995 Pattern-dependent correction of mask topography effects for alternating phase-shifting masks

Richard A. Ferguson, Alfred K. K. Wong, Timothy A. Brunner, Lars W. Liebmann

Proceedings Volume 2440, Optical/Laser Microlithography VIII; (1995) https://doi.org/10.1117/12.209267
Event: SPIE's 1995 Symposium on Microlithography, 1995, Santa Clara, CA, United States

Abstract

Strategies for modifying both mask fabrication processes and design data for alternating phase-shifting masks to account for mask scattering phenomena are explored. Results were derived from the rigorous solution of Maxwell's equations using the EMFlex and TEMPEST programs for an etched-quartz fabrications process. By importing the resulting diffracted orders into VCIMAGE, full vector calculation of the aerial image from mask to wafer was obtained. From the rigorous mask simulations, the 0^th and 1^st diffracted orders were translated into an effective transmission and phase based on a thin-mask approximation. With this analysis technique, a 0.25 micrometers line-space grating for the baseline etched-quartz process (4X magnification) showed a transmission error of 7.2% and a phase error of 1.6 degree(s). In order to compensate for these errors, etch-back fabrication techniques, in which the quartz was recessed beneath the chrome, were evaluated to determine the extent to which the transmission and phase errors could be reduced. For the dual etch-back process typically in use today, a residual transmission error of approximately 0.5% could not be completely removed, even for etch-back depths greater than 200 nm. Correction of the phase errors was achieved by reducing the reactive-ion etch depth by 2-3 nm. Design manipulation, in which the 180 degree(s) opening was increased in size, required feature-dependent phase errors as large as 1 degree(s) were present.

Citation Download Citation

Richard A. Ferguson, Alfred K. K. Wong, Timothy A. Brunner, and Lars W. Liebmann "Pattern-dependent correction of mask topography effects for alternating phase-shifting masks", Proc. SPIE 2440, Optical/Laser Microlithography VIII, (26 May 1995); https://doi.org/10.1117/12.209267

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available