Flow sensor using optical fiber strain gauges

Nicolas F. Schmitt; R. Morgan; Patricia J. Scully; Elfed Lewis; Rekha Chandy

doi:10.1117/12.221740

29 September 1995 Flow sensor using optical fiber strain gauges

Nicolas F. Schmitt, R. Morgan, Patricia J. Scully, Elfed Lewis, Rekha Chandy

Proceedings Volume 2508, Chemical, Biochemical, and Environmental Fiber Sensors VII; (1995) https://doi.org/10.1117/12.221740
Event: European Symposium on Optics for Environmental and Public Safety, 1995, Munich, Germany

Abstract

A novel technique for the measurement of air flow velocity using an optical fiber sensor is reported. The sensor measures the deformation of a rubber cantilever beam when subjected to the stresses induced by drag forces in the presence of the airflow. Tests performed in a wind tunnel have indicated a sensitivity of 2 (mu) /(m/s). A qualitative model based on fiber mode propagation has been developed which allows the sensor to be characterized in terms of optical losses. A single 1 mm diameter polymer fiber is mounted on the rectangular section rubber cantilever (section 14 mm by 6 mm) and six grooves are etched into the fiber which extend into the core of the fiber. As the beam deviates the surface deforms (stretches or contracts) and the fiber is subjected to strain. As the strain is increased the grooves become wider and the amount of light transmitted through the fiber is reduced due to increased losses. The sensor described has all the advantages of optical fiber sensors including electrical noise immunity and intrinsic safety for use in hazardous environments. However, its simple construction, robustness, versatility for a number of different fluid applications, as well as relatively low cost make it attractive for use in a wide variety of measurement applications e.g. wind velocity measurement where airborne moisture or chemicals are present.

Citation Download Citation

Nicolas F. Schmitt, R. Morgan, Patricia J. Scully, Elfed Lewis, and Rekha Chandy "Flow sensor using optical fiber strain gauges", Proc. SPIE 2508, Chemical, Biochemical, and Environmental Fiber Sensors VII, (29 September 1995); https://doi.org/10.1117/12.221740

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available