Sensor-based virtual bumpers for collision avoidance: configuration issues

Michael Peter Hennessey; Craig Shankwitz; Max Donath

doi:10.1117/12.228920

27 December 1995 Sensor-based virtual bumpers for collision avoidance: configuration issues

Michael Peter Hennessey, Craig Shankwitz, Max Donath

Proceedings Volume 2592, Collision Avoidance and Automated Traffic Management Sensors; (1995) https://doi.org/10.1117/12.228920
Event: Photonics East '95, 1995, Philadelphia, PA, United States

Abstract

Most collision avoidance strategies for highway vehicles have primarily been based on control of 1 degree-of-freedom (1 DOF). Such collision avoidance strategies typically use RADAR or other range sensors as a means to servo on the distance between the controlled vehicle and the vehicle in front. However, for large inertia vehicles such as trucks, such strategies which involve engine/transmission or brake control, may likely prove inadequate for avoiding collisions with vehicles on either side or with animals. A 2 DOF strategy involving both steering and speed control conceptually offers significant advantages over 1 DOF strategies. A 2 DOF strategy is introduced that is based on the concept of a virtual bumper. As the name implies, the approach is based on surrounding the perimeter of the vehicle with a sensor-based computer controlled `bumper'. As the bumper's boundary is `deflected,' (i.e. the vehicle's `personal space' is invaded) a virtual force proportional to the amount of deflection is generated. The vehicle controller responds to this virtual force in such a way as to return the bumper to its non-deflected state. Information on the road geometry can also be used to generate a virtual force field to keep the vehicle in its lane. A number of vehicle mounted RADAR units measure the range and range rate between the sensors (mounted and oriented to cover the field around the vehicle) and the obstacle. Using this sensory information and an impedance based control algorithm, the vehicle will attempt to always move away from the obstacle in a controlled manner using both steering and speed control. By integrating local lane/shoulder information and sensor provided data on incursions into the vehicle's personal space, appropriate trajectory displacements are generated based on the virtual force summation. In this paper, we discuss a number of issues that need to be addressed in developing such virtual bumpers.

Citation Download Citation

Michael Peter Hennessey, Craig Shankwitz, and Max Donath "Sensor-based virtual bumpers for collision avoidance: configuration issues", Proc. SPIE 2592, Collision Avoidance and Automated Traffic Management Sensors, (27 December 1995); https://doi.org/10.1117/12.228920

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available