Paper
19 September 1995 Micromolded structures for integrated optical sensors
Author Affiliations +
Proceedings Volume 2639, Micromachining and Microfabrication Process Technology; (1995) https://doi.org/10.1117/12.221284
Event: Micromachining and Microfabrication, 1995, Austin, TX, United States
Abstract
A novel approach for the fabrication of single-mode channel waveguides combined with focusing grating couplers by replication into polymer substrates is proposed and experimentally demonstrated. The concept is based on fabricating a master structure containing tall ridge patterns (about 3 micrometers high) combined with shallow, focusing grating structures (about 10 nm depth). By a micromolding technique using nickel shims, this pattern is hot embossed into a polymer substrate which is then full-area coated with a high-index dielectric waveguiding film. The focusing grating coupler is directly connected to the channel guide via a width-tapered waveguide section. An incident collimated beam can thus be coupled without the need for additional optics to the stripe waveguide formed by the film deposited on top of the ridge pattern. Results of experiments on stripe waveguides in quartz, focusing grating couplers in polycarbonate and combined channel waveguide and focusing structures in polycarbonate are presented and discussed. The feasibilty of the novel concept has been demonstrated by coupling a collimated free-space laser beam into a ridge waveguide on a replicated sample. The technology should find applications in integrated optical sensors and other low-cost integrated optical devices.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lothar U. Kempen, Rino E. Kunz, and Michael T. Gale "Micromolded structures for integrated optical sensors", Proc. SPIE 2639, Micromachining and Microfabrication Process Technology, (19 September 1995); https://doi.org/10.1117/12.221284
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Quartz

Integrated optics

Channel waveguides

Collimation

Polymers

Etching

RELATED CONTENT

Integrated optics displacement sensor
Proceedings of SPIE (February 01 1991)
Advanced micromoulding of optical components
Proceedings of SPIE (September 02 1999)
Replicated microstructures for integrated optics
Proceedings of SPIE (July 28 1994)

Back to Top