Precision and accuracy of 3D lower extremity residua measurement systems

Paul K. Commean; Kirk E. Smith; Michael W. Vannier M.D.; Charles F. Hildebolt D.D.S.; Thomas K. Pilgram

doi:10.1117/12.237953

16 April 1996 Precision and accuracy of 3D lower extremity residua measurement systems

Paul K. Commean, Kirk E. Smith, Michael W. Vannier M.D., Charles F. Hildebolt D.D.S., Thomas K. Pilgram

Author Affiliations +

Proceedings Volume 2710, Medical Imaging 1996: Image Processing; (1996) https://doi.org/10.1117/12.237953
Event: Medical Imaging 1996, 1996, Newport Beach, CA, United States

Abstract

Accurate and reproducible geometric measurement of lower extremity residua is required for custom prosthetic socket design. We compared spiral x-ray computed tomography (SXCT) and 3D optical surface scanning (OSS) with caliper measurements and evaluated the precision and accuracy of each system. Spiral volumetric CT scanned surface and subsurface information was used to make external and internal measurements, and finite element models (FEMs). SXCT and OSS were used to measure lower limb residuum geometry of 13 below knee (BK) adult amputees. Six markers were placed on each subject's BK residuum and corresponding plaster casts and distance measurements were taken to determine precision and accuracy for each system. Solid models were created from spiral CT scan data sets with the prosthesis in situ under different loads using p-version finite element analysis (FEA). Tissue properties of the residuum were estimated iteratively and compared with values taken from the biomechanics literature. The OSS and SXCT measurements were precise within 1% in vivo and 0.5% on plaster casts, and accuracy was within 3.5% in vivo and 1% on plaster casts compared with caliper measures. Three-dimensional optical surface and SXCT imaging systems are feasible for capturing the comprehensive 3D surface geometry of BK residua, and provide distance measurements statistically equivalent to calipers. In addition, SXCT can readily distinguish internal soft tissue and bony structure of the residuum. FEM can be applied to determine tissue material properties interactively using inverse methods.

Citation Download Citation

Paul K. Commean, Kirk E. Smith, Michael W. Vannier M.D., Charles F. Hildebolt D.D.S., and Thomas K. Pilgram "Precision and accuracy of 3D lower extremity residua measurement systems", Proc. SPIE 2710, Medical Imaging 1996: Image Processing, (16 April 1996); https://doi.org/10.1117/12.237953

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE