PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The peculiarities of structure surface layer forming of Ti-alloy by laser alloying by B, C and Cr are presented in this work. The surface layer by the laser alloying consists of great quantity of small particles of borides, carbides and intermetallides which raise the hardness of the surface to 9500 - 11500 MPa. The antifriction properties investigation shows that the wear of Ti-alloy surface is reduced after the laser alloying. The addition of solid oiling into the alloying composition allows us to reduce the coefficient of friction to the sizes that correspond to the coefficient of friction of the traditional anti-friction materials.
V. S. Postnikov andM. N. Tagirov
"Laser boron carbiding of Ti-alloy", Proc. SPIE 2713, Fifth International Conference on Industrial Lasers and Laser Applications '95, (1 March 1996); https://doi.org/10.1117/12.234217
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
V. S. Postnikov, M. N. Tagirov, "Laser boron-carbiding of Ti-alloy," Proc. SPIE 2713, Fifth International Conference on Industrial Lasers and Laser Applications '95, (1 March 1996); https://doi.org/10.1117/12.234217