Paper
17 June 1996 Analytical characterization of a Bruderhedral calibration target model
Author Affiliations +
Abstract
The Army Research Laboratory (ARL) has constructed a variation of the bruderhedral calibration and radar cross section (RCS) target model and measured its radar characteristics in the field. A computer version of the same model was generated, and later characterized in both elevation and azimuth for validation. Our goal is to develop a millimeter-wave (MMW) signature generation tool for guidance integrated fuzing (GIF) systems and applications. Before realizing this goal, one must develop a test-bed of tools and approaches upon which to build. ARL has identified approaches to developing generic analytical target-signature models based on some existing electromagnetic scattering codes. A high-frequency RCS and signature prediction software model was selected to perform the radar analysis and provide a mechanism, a synthetic aperture radar (SAR) model, for recognizing prominent scatterers off high-fidelity target models. This method will assist us in creating suitable far- to near-field 3-D transitional models at MMW frequencies. Two target model descriptions were used in the signature prediction model: a flat facet format and a curved surface format. This paper introduces these software models, and some optics and SAR considerations relating to the test wavelength and the size of the target. Also, the simulated azimuthal and elevation response patterns, along with some results from the SAR model, are presented.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter M. Cremona-Simmons "Analytical characterization of a Bruderhedral calibration target model", Proc. SPIE 2742, Targets and Backgrounds: Characterization and Representation II, (17 June 1996); https://doi.org/10.1117/12.243019
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D modeling

Synthetic aperture radar

Systems modeling

Radar

Computer aided design

Calibration

Analytical research

Back to Top