Mask technology for 0.18-um device generation

Jung-Min Sohn; Seong-Woon Choi; Byung Guk Kim; Hanku Cho; Hee-Sun Yoon

doi:10.1117/12.245234

24 July 1996 Mask technology for 0.18-μm device generation

Jung-Min Sohn, Seong-Woon Choi, Byung Guk Kim, Hanku Cho, Hee-Sun Yoon

Proceedings Volume 2793, Photomask and X-Ray Mask Technology III; (1996) https://doi.org/10.1117/12.245234
Event: Symposium on Photomask and X-Ray Mask Technology, 1996, Kawasaki City, Japan

Abstract

As the requirement of the more tightened design rule has been emerged, e-beam direct writing and x-ray lithography have been considered as next generation technology . However, due to the rapid development in photolithography, it will be employed in manufacturing 1 Gb DRAM. To overcome present optical lithographic technology, several possible techniques such as deep ultraviolet (DUV), phase shift mask (PSM), off-axis illumination (OA1), optical proximity correction (OPC), and combinations of these methods are considered. The advanced mask technology play a key role in these technologies and the tendency will be dramatically increased in near future. Although the resolution of 4X reticle for 0.18 μm device is 0.72 μm, the feature size less than 0.72 μm is necessary for wafer process latitude. Therefore, critical dimension (CD) linearity below 0.72 μm is needed for 1 Gb reticle, and the minimum resolution less than 0.3 μm should be resolved for the OPC patterns. At low acceleration voltage, however, both the CD linearity and the minimum resolution are so severely affected by electron scattering that small beam size, thin resist, and dose correction will be needed for reducing this effect. In order to satisfy the higher resolution, high acceleration voltage system should be employed. In addition, as the field size of device increases and process latitude on the wafer decreases, CD uniformity and defect control will be considered more serious than now. In this paper, discussion of the expected technologies, specifications, improvement of the process in manufacturing 1 Gb DRAM reticles are presented.

Citation Download Citation

Jung-Min Sohn, Seong-Woon Choi, Byung Guk Kim, Hanku Cho, and Hee-Sun Yoon "Mask technology for 0.18-μm device generation", Proc. SPIE 2793, Photomask and X-Ray Mask Technology III, (24 July 1996); https://doi.org/10.1117/12.245234

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Photomasks

Critical dimension metrology

Optical proximity correction

Semiconducting wafers

Manufacturing

Optical lithography

Reticles

Show All Keywords

Keywords/Phrases

Search In:

Publication Years