Innovative frequency measurement technique used in the design of a single channel frequency to digital converter ASIC

Neranjen Ramalingam; Vijay K. Varadan; Vasundara V. Varadan

doi:10.1117/12.250718

17 September 1996 Innovative frequency measurement technique used in the design of a single channel frequency to digital converter ASIC

Neranjen Ramalingam, Vijay K. Varadan, Vasundara V. Varadan

Author Affiliations +

Proceedings Volume 2882, Micromachined Devices and Components II; (1996) https://doi.org/10.1117/12.250718
Event: Micromachining and Microfabrication '96, 1996, Austin, TX, United States

Abstract

The frequency to digital converter (FDC) is an application specific integrated circuit. The chip has been designed to handle one input channel but can easily be expanded to handle multiple channels of frequencies. The channel is capable of measuring frequencies from 100 Hz to 100 kHz. The power consumption of the chip is very low. The frequency measurement accuracy is better than 0.1 percent. The conversion rate per channel is 100 samples/second which can be carried too. The chip has a built-in test equipment to verify its operation. It is able to generate frequencies like 8 Mhz, 4Mhz, 2Mhz and 1Mhz which can be fed as optional clock frequencies depending on the accuracy desired. The FDC chip can be interfaced to a 16 bit bus. To meet these stringent specifications of the FDC chip an innovative frequency measurement technique has been devised called the hybrid technique of frequency measurement. The technique proves to be very accurate and it is found that by varying the sampling rate the range of input frequencies over which this accuracy can be achieved also changes. The specifications are particularly strict so that it is possible to use the chip for any military application for which a very reliable operation is demanded. The FDC chip is hence ideal for control and guidance purposes. The chip has wide ranging applications. In conjunction with sensors such as accelerometers it can be used to design smart sensors. The chip can play a vital role in engine controllers and in pressure measurements using vibrating type transducers. Sometimes to isolate transducers, the output is converted to frequency and isolation is achieved using opto-isolators; then by measuring the frequency using this chip this can be converted to digital information.

Citation Download Citation

Neranjen Ramalingam, Vijay K. Varadan, and Vasundara V. Varadan "Innovative frequency measurement technique used in the design of a single channel frequency to digital converter ASIC", Proc. SPIE 2882, Micromachined Devices and Components II, (17 September 1996); https://doi.org/10.1117/12.250718

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available