Paper
30 September 1996 Preparation of a silicon carbide ceramic fiber by CO2 laser heat treatment
Jichun Tan, Zhe Chen, Yong Su, Chunxiang Feng, Dong Cao, Dianchun Liu
Author Affiliations +
Abstract
It is known that at 1200-1400 degrees C the polycarlosilane (PC) can be converted into silicon carbide (SiC) by electric furnace heating. However, the production cycle is longer than ten hours owing to the limit to the raising rate of furnace temperature. A method of laser heat-treatment for preparation of SiC fiber is presented in this paper. As soon as PC precursor is made by a fiber spinning machine, it is converted into SiC fiber of diameter about 12 micrometers under nitrogen flow. X-ray crystallogram show cubic system of (beta) -SiC was formed. The production cycle is shorter than 5 seconds, when the CO2 laser power density is about 30 W/mm2. The defect, such as bubble and hole inside the fiber, was monitored, which are formed by too large heating rate. The chemical and physical mechanism to avoid defect, together with the design of multi-beam optical setup for heating the moving fiber, is discussed.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jichun Tan, Zhe Chen, Yong Su, Chunxiang Feng, Dong Cao, and Dianchun Liu "Preparation of a silicon carbide ceramic fiber by CO2 laser heat treatment", Proc. SPIE 2888, Laser Processing of Materials and Industrial Applications, (30 September 1996); https://doi.org/10.1117/12.253121
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon carbide

Fiber lasers

Carbon dioxide lasers

Crystals

Ceramics

Mirrors

Optical design

RELATED CONTENT

Multilayer optics under CHESS A2 wiggler beam
Proceedings of SPIE (September 03 2008)
Beam-splitting mirrors for an APS beamline
Proceedings of SPIE (October 05 2007)
Active mirror based on the bimetallic strip effect
Proceedings of SPIE (November 12 1993)
Radio-Frequency Excited Waveguide CO2 Lasers
Proceedings of SPIE (March 27 1985)
Cooled mirror for a double-undulator beamline
Proceedings of SPIE (January 13 2004)

Back to Top