Paper
20 September 1996 Low-cost single-mode refractive plate switch using micromachined silicon waferboard for passive alignment
Hongtao Han, Bernie Caron, Warren H. Lewis, Jay Mathews, Robert Addison Boudreau, Terry P. Bowen, Dale D. Murray
Author Affiliations +
Abstract
Anisotropically etched v-grooves on silicon substrate for the positioning of optical fibers have been widely implemented in fiber optics and optoelectronic applications. Because the anisotropic etching depends upon the crystallographic orientation of silicon, the v-grooves are normally formed parallel to the <110> direction. However, some applications, such as optical switches, and wavelength division multiplexing/demultiplexing devices, fan-in and fan-out configuration for fiber positioning are required. In this paper, we will report a single mode refractive plate switch where a micromachined silicon waferboard was implemented for passively positioning optical fibers. We successfully demonstrated a 2 X 2 single mode optical switch with less than 0.64 dB loss.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongtao Han, Bernie Caron, Warren H. Lewis, Jay Mathews, Robert Addison Boudreau, Terry P. Bowen, and Dale D. Murray "Low-cost single-mode refractive plate switch using micromachined silicon waferboard for passive alignment", Proc. SPIE 2893, Fiber Optic Components and Optical Communication, (20 September 1996); https://doi.org/10.1117/12.252076
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Etching

Switches

Optical fibers

Optical alignment

Optical switching

Anisotropic etching

RELATED CONTENT

Microjoinery for optomechanical systems
Proceedings of SPIE (April 11 1997)
The packaging technology of optical switch arrays
Proceedings of SPIE (February 07 2006)
Micromachined silicon x-ray optics
Proceedings of SPIE (November 11 1994)
Angular alignment for wafer bonding
Proceedings of SPIE (September 23 1996)
Vertical Cantilever Beams For Optical Switching
Proceedings of SPIE (January 11 1987)

Back to Top