Paper
3 October 1996 Solder-paste inspection by structured light methods based on phase measurement
Luigi Di Stefano, Frank Boland
Author Affiliations +
Abstract
Solder paste inspection, i.e. reconstruction of the 3D shape of the solder paste printed on surface mount technology component pads, is a major inspection task in the printed circuit board manufacturing process. We have investigated the use of machine vision methods based on structured light and phase measurement for on-line solder paste inspection. With these methods a periodic light pattern is projected onto the object and imaged by a camera from a different viewpoint. Since the imaged pattern is phase-modulated according to the topography of the object, suitable phase- extraction techniques enable reconstruction of the 3D shape. In a previous paper we have shown that the Fourier-based phase-extraction technique allows recovery of the 3D shape of solder paste on pads but is too slow for effective on- line inspection. In this paper we describe a new profilometry technique which uses a fast demodulation scheme and simple DSP operators such as comb filters and moving averages. Experimental results show that the new technique is equivalent to the Fourier technique with respect to reconstruction of the 3D shape of solder paste and computation times measurements indicate that it is roughly 20 times faster.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Luigi Di Stefano and Frank Boland "Solder-paste inspection by structured light methods based on phase measurement", Proc. SPIE 2899, Automated Optical Inspection for Industry, (3 October 1996); https://doi.org/10.1117/12.253007
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Linear filtering

Demodulation

Fourier transforms

Structured light

3D metrology

Cameras

Back to Top