Paper
26 June 1997 Finite element modeling and simulation on a novel microstructure silicon accelerometer with direct frequency output
Shangchun Fan, Guangyu Liu, Man Hyung Lee
Author Affiliations +
Abstract
This paper establishes the finite element method (FEM) model of a practical silicon beam resonator attached to a E-type round diaphragm, which is used for measuring the acceleration, in details, based on sensing mechanism of a novel resonant silicon accelerometer. The relationship between the basic natural frequency of the beam resonator and the measured acceleration is calculated, analyzed and investigated by making use of the above FEM model. Some important qualitative and quantitative results on the natural frequency-acceleration relationship of the above bema resonator and the microsensor are obtained. Finally, based on the differential output scheme, a set of appropriate parameters of the above sensing structure is determined, for measuring the acceleration within (-100, +100)m/s2. The simulation result shows that the differential frequency output is within (-8833, 8910) Hz and reference zero frequency is 126914 Hz for zero acceleration, corresponding to the determined parameters of the above sensing structure.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shangchun Fan, Guangyu Liu, and Man Hyung Lee "Finite element modeling and simulation on a novel microstructure silicon accelerometer with direct frequency output", Proc. SPIE 3087, Navigation and Control Technologies for Unmanned Systems II, (26 June 1997); https://doi.org/10.1117/12.277220
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon

Sensors

Resonators

Finite element methods

Structural sensing

Beam shaping

Mathematical modeling

Back to Top