Paper
28 July 1997 Development of an electron-beam optical column for the mask lithography system
Tadashi Komagata, Yasutoshi Nakagawa, Hitoshi Takemura, Nobuo Gotoh
Author Affiliations +
Abstract
Mask accuracies for the newest and next generation devices are very tight. The SIA Roadmap indicates writing accuracies (CD uniformity) of 18 nm and 13 nm for 1-Gbit and 4-Gbit DRAM 4X reticles, respectively. To meet this challenge, a new electron optical column is being developed for an electron beam mask writing system. The column has a beam current density of 20 A/cm2 (50 kV), a beam blurring of 0.06 micrometer at a 16 micrometer2 beam size, and a total aberration of less than 0.05 micrometer at 1 mm deflection length. The key technologies for this column are as follows: (1) Shorter column length and wider beam half-angle for reduction of Coulomb interaction; (2) Per shot focus correction of space charge effect; (3) In-lens, single stage electrostatic beam deflection system with focus and astigmatism correction. In this paper, we report the simulation results of this electron optical column design.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tadashi Komagata, Yasutoshi Nakagawa, Hitoshi Takemura, and Nobuo Gotoh "Development of an electron-beam optical column for the mask lithography system", Proc. SPIE 3096, Photomask and X-Ray Mask Technology IV, (28 July 1997); https://doi.org/10.1117/12.277296
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Monochromatic aberrations

Lithography

Optical design

Beam shaping

Electrodes

Electron beams

RELATED CONTENT


Back to Top