High-speed multichannel length measurement with a CCD scanning line

Burkhard Huhnke

doi:10.1117/12.287749

25 September 1997 High-speed multichannel length measurement with a CCD scanning line

Burkhard Huhnke

Proceedings Volume 3100, Sensors, Sensor Systems, and Sensor Data Processing; (1997) https://doi.org/10.1117/12.287749
Event: Lasers and Optics in Manufacturing III, 1997, Munich, Germany

Abstract

This paper presents a CCD line scanning method, which allows the parallel measurement of up to six length measurement channels with a scanning rate of higher than 1000 Hz per channel. Mathematical methods--interpolation between the measured points--allow the combination of the results to find approximately the curvature of a moving surface or the misalignment of the sensor respectively. The sensor could be fitted in a compact case and works in a measurement range of 15 mm with a resolution better than 10 micrometers . A subpixel resolution of 1 micrometers can be achieved by computation. The requirements to high-speed operating sensors with high accuracy for length measurement are rising constantly. The instrumentation may readily be integrated into the production process (in-process measurement), e.g. for the ends of quality assurance and to make an automatic compensation of deviations possible. A very important fact is that the advantage of contactless measurement is avoiding the wear and tear of the probe tip, the material, respectively, on the other hand it reduces the error of measurement results from a thin film of cooling oil and chips. High pressure jets make sure that the workpiece surface in the measurement areas are blown free. Variations of the ambient temperature doesn't effect the results since the instrumentation is in a housing at stable temperature. Inductive and capacitive measurement methods have problems with curved surfaces. These methods are only used with expanded methods of mathematical compensation on these circumstances. Therefore the optical sensors are very interesting for achieving the requirements of the in-process measurements.

Citation Download Citation

Burkhard Huhnke "High-speed multichannel length measurement with a CCD scanning line", Proc. SPIE 3100, Sensors, Sensor Systems, and Sensor Data Processing, (25 September 1997); https://doi.org/10.1117/12.287749

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
11 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Sensors

Charge-coupled devices

Diodes

Calibration

CCD image sensors

Image sensors

Signal detection

Show All Keywords

Keywords/Phrases

Search In:

Publication Years