Paper
25 September 1997 Tools for configuration and evaluation of lasercells
Juergen Spitznagel
Author Affiliations +
Proceedings Volume 3102, Rapid Prototyping and Flexible Manufacturing; (1997) https://doi.org/10.1117/12.281317
Event: Lasers and Optics in Manufacturing III, 1997, Munich, Germany
Abstract
To support an expert planning lasercells to advise prospective buyers, the Institute for Machine Tools and Industrial Management (IWB) developed a lasercell-planning-system (LaPlaS), which includes tools for configuration and evaluation. Configuration is supported by a database module. Therefore a framework was developed which allows the modeling of lasercells for cutting and welding. Moreover methods to represent knowledge of former plannings were introduced. LaPlaS supports the expert by using this knowledge based data to select matching lasercells or laser components. On the other hand the expert has the possibility to employ his own experience by selecting lasercells or laser components with user defined search criteria. Evaluation is supported by a simulation module. A three dimensional model is used to represent the selected lasercell and to examine the working motion. Data gained from simulation lead to statements about cycle time, collision and motion behavior as well as other evaluation criteria without the need of a real cell. Moreover the simulation module may be used for automatic layout optimization. Therefore functions were developed which generate the optimal lasercell layout based on user defined optimization criteria as minimal cycle time for example.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Juergen Spitznagel "Tools for configuration and evaluation of lasercells", Proc. SPIE 3102, Rapid Prototyping and Flexible Manufacturing, (25 September 1997); https://doi.org/10.1117/12.281317
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser development

Laser components

Robots

Computer aided design

Control systems

3D modeling

Laser cutting

RELATED CONTENT

A semi-automatic 3D laser scan system design
Proceedings of SPIE (November 24 2009)
Prospects of very high-power CO2 laser in welding
Proceedings of SPIE (September 23 1996)
Study of laser guided measurement robot
Proceedings of SPIE (August 04 2009)

Back to Top