Paper
7 July 1997 Coplanar-grid detector with single-electrode readout
Author Affiliations +
Abstract
The coplanar-grid technique provides substantial spectral performance improvement over that of conventional detector designs and electronics when applied to gamma-ray detectors based on compound semiconductors. The technique realizes this improvement by measuring the difference between the induced charge signals from two interdigitated coplanar-grid electrodes. By adjusting the relative gain between the two grid signals prior to subtraction, the difference signal can be made less sensitive to the poor carrier transport properties of the detector material and thus improve the spectral response of the detector. In this paper, we discuss a variation of the coplanar-grid method in which the signal from only one grid electrode is read out. The signal response is optimized by changing the relative areas of the two grid electrodes and the bias applied across the detector. In this scheme, only one preamplifier is needed and signal subtraction is not necessary. This eliminates the electronic noise contribution from the additional preamplifier used in the normal coplanar-grid implementation, and conventional single- amplifier detector electronics can be used. Experimental results using CdZnTe detectors are presented.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark S. Amman and Paul N. Luke "Coplanar-grid detector with single-electrode readout", Proc. SPIE 3115, Hard X-Ray and Gamma-Ray Detector Physics, Optics, and Applications, (7 July 1997); https://doi.org/10.1117/12.277687
Lens.org Logo
CITATIONS
Cited by 36 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Electrodes

Signal detection

Gamma radiation

Electronics

Crystals

Electron transport

Back to Top