Paper
17 October 1997 Final prototype design for the adaptive secondary mirror of the 6.5-m MMT
Donald G. Bruns, Todd K. Barrett, Timothy J. Brinkley, Domingo Goyena, David G. Sandler, Hubert M. Martin, Guido Brusa, James Roger P. Angel
Author Affiliations +
Abstract
The upgraded 6.5 m MMT in Arizona will use an adaptive secondary to optimize performance in the near infrared spectral region. The secondary mirror is a 2 mm thick, 640 mm diameter Zerodur shell suspended only by a flexible center hub. Three hundred voice coil actuators installed in an aluminum reference surface deform the shell according to commands from a wavefront sensor. Capacitor position sensors surrounding each actuator provide feedback in an inner servo loop, much faster than the exterior wavefront sensor control bandwidth. A 60 actuator prototype, nearly identical to the final adaptive secondary size, has been built and is currently being tested.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Donald G. Bruns, Todd K. Barrett, Timothy J. Brinkley, Domingo Goyena, David G. Sandler, Hubert M. Martin, Guido Brusa, and James Roger P. Angel "Final prototype design for the adaptive secondary mirror of the 6.5-m MMT", Proc. SPIE 3126, Adaptive Optics and Applications, (17 October 1997); https://doi.org/10.1117/12.290145
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Capacitors

Glasses

Prototyping

Sensors

Mirrors

Aluminum

RELATED CONTENT


Back to Top