Paper
16 June 1998 Experiments with particle damping
Joseph J. Hollkamp, Robert W. Gordon
Author Affiliations +
Abstract
High cycle fatigue in jet engines is a current military concern. The vibratory stresses that cause fatigue can be reduced by adding damping. However, the high temperatures that occur in the gas turbine greatly hinder the application of mature damping technologies. One technology which may perform in the harsh environment is particle damping. Particle damping involves placing metallic or ceramic particles inside structural cavities. As the cavity vibrates, energy is dissipated through particle collisions. Performance is influenced by many parameters including the type, shape, and size of the particles; the amount of free volume for the particles to move in; density of the particles; and the level of vibration. This paper presents results from a series of experiments designed to gain an appreciation of the important parameters. The experimental setup consists of a cantilever beam with drilled holes. These holes are partially filled with particles. The types of particles, location of the particles, fill level, and other parameters are varied. Damping is estimated for each configuration. Trends in the results are studied to determine the influence of the varied parameter.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joseph J. Hollkamp and Robert W. Gordon "Experiments with particle damping", Proc. SPIE 3327, Smart Structures and Materials 1998: Passive Damping and Isolation, (16 June 1998); https://doi.org/10.1117/12.310675
Lens.org Logo
CITATIONS
Cited by 34 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Tungsten

Metals

Aluminum

Glasses

Titanium

Ceramics

RELATED CONTENT

Evaluation of materials for on-board laser diagnostics
Proceedings of SPIE (May 14 2008)
Research on the laser lap welding of TC4 titanium alloy...
Proceedings of SPIE (January 04 2008)
Biocompatible gradient ceramic coatings for metal implants
Proceedings of SPIE (August 03 2001)
High-Rate Sputtering For Optical Purposes
Proceedings of SPIE (November 28 1983)
Laser dispersing of ceramic powders into Al-alloys
Proceedings of SPIE (January 23 2007)

Back to Top