Paper
28 August 1998 Infrared Telescope Technology Testbed primary mirror test results
Author Affiliations +
Abstract
An 85 cm aperture beryllium mirror was fabricated as part of the IR Telescope Technology Testbed (ITTT), a facility to which the SIRTF flight telescope will be traceable. The ITTT was developed to demonstrate that diffraction-limited performance at a wavelength of 6.5 micrometers is attainable from an ultra-lightweight meter-class beryllium telescope operating at a temperature of 5.5K. Cryo-null figuring was employed to meet the requirements for the shape of the primary mirror at its operating temperature over an aperture of 79cm. The results of this process will be presented, including the repeatability of the surface through cryogenic temperature cycling. Modeling of system performance using the residual figure error will be described. Image-based methods were used to characterize a turned up edge that is too steep to be measured with an interferometer.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew E. Lowman, Steven A. Macenka, David C. Redding, and Scott A. Basinger "Infrared Telescope Technology Testbed primary mirror test results", Proc. SPIE 3356, Space Telescopes and Instruments V, (28 August 1998); https://doi.org/10.1117/12.324491
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

Space telescopes

Vignetting

Infrared telescopes

Interferometers

Beryllium

Back to Top