Plasma electrode Pockels cell for the National Ignition Facility

Mark A. Rhodes; Scott N. Fochs; Peter J. Biltoft; Terry W. Alger; Bill Funkhouser; Charles D. Boley

doi:10.1117/12.354225

23 July 1999 Plasma electrode Pockels cell for the National Ignition Facility

Mark A. Rhodes, Scott N. Fochs, Peter J. Biltoft, Terry W. Alger, Bill Funkhouser, Charles D. Boley

Proceedings Volume 3492, Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion; (1999) https://doi.org/10.1117/12.354225
Event: Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, 1998, Monterey, CA, United States

Abstract

The NIF, now under construction at LLNL, will be the largest laser fusion facility ever built. The NIF laser architecture is based on a multi-pass power amplifier to reduce cost and maximize performance. A key component in this laser design is an optical switch that closes to trap the optical pulse in the cavity for four gain passes and then opens to divert the optical pulse out of the amplifier cavity. The switch is comprised of a Pockels cell and a polarizer and is unique because it handles a beam that is 40 cm X 40 cm square and allows close horizontal and vertical beam spacing. Conventional Pockels cells do not scale to such large apertures or the square shape required for close packing. Our switch is based on a Plasma-Electrode Pockels Cell (PEPC). In a PEPC, low-pressure helium discharges are formed on both sides of a thin slab of electro-optic material. Typically, we use KH₂PO₄ crystals (KDP). The discharges form highly conductive, transparent sheets that allow uniform application of a high-voltage pulse across the crystal. A 37 cm X 37 cm PEPC has been in routine operation for two years on the 6 kJ Beamlet laser at LLNL. For the NIF, a module four apertures high by one wide is required. However, this 4 X 1 mechanical module will be comprised electrically of a pair of 2 X 1 sub-modules. Last year, we demonstrated full operation of a prototype 2 X 1 PEPC. In this PEPC, the plasma spans two KDP crystals. A major advance in the 2 X 1 PEPC over the Beamlet PEPC is the use of anodized aluminum construction that still provides sufficient insulation to allow formation of the planar plasmas. In this paper, we discuss full 4 X 1 NIF prototypes.

Citation Download Citation

Mark A. Rhodes, Scott N. Fochs, Peter J. Biltoft, Terry W. Alger, Bill Funkhouser, and Charles D. Boley "Plasma electrode Pockels cell for the National Ignition Facility", Proc. SPIE 3492, Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, (23 July 1999); https://doi.org/10.1117/12.354225

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available